Muratec Fax Machine Erasing center setting, Binding margin setting, Erase Center Setting

Copy settings

B. Erasing center setting

Default setting: OFF, Erased margin: 0.1 inch

The default setting of the erased margins in the erase center function can be changed within 0.1 – 2.0 inches in 0.1 inch steps.

C. Binding margin setting

Default setting: OFF, Binding margins: 0 inch

The default setting of the binding space in the image shift copy function can be changed within 0.1 – 1.0 inch in 0.1 inch steps.

1		Erase Center Setting
	Press MENU, [Copy Set].	Use cursor to select�
		item.	: OFF
2	Select “B.Erase Center setting” and then	Erase Center
		Default	: Center 0.1"
	press [Enter].
		Exit	Enter

1 Press MENU, [Copy Set].

2 Select “C.Margin Setting” and then press [Enter].

Margin Setting

Use cursor to select� item.

Margin : OFF

Default : Left 0.0"

Right 0.0"

Top 0.0"

Bottom 0.0"

ExitEnter

3		Erase Center Setting
	To change the default setting of Erase Center,	Use cursor to select�
		item.
4	select “Erase Center” then press [Enter].	ON
	Select “ON” or “OFF” then press [Enter] to	OFF
	save the setting.
			Enter
5		Erase Center Setting
	If you want to change the default value of	Move cursor and enter�
		value.	(0.1-2.0)
	erased margin, select “Default” then press
	[Enter].	Document
6	Enter desired value, then press [Enter].		0.1"
7	Press [Exit] or RESET to save the default set-	Default	Enter
	ting.

Note: Press RESET to return to standby.

Note: If you set the default setting to ON, the Erase Center icon will be appeared on the LCD.

3		Margin Setting
	To change the default setting of the binding	Use cursor to select�
		item.
4	margin, select “Margin” then press [Enter].	ON
	Select “ON” or “OFF” then press [Enter] to	OFF
	save the setting.
			Enter
5		Margin Setting
	If you want to change the default value of bind-	Use cursor to set�
		bind margin. (0.1-1.0)
	ing space, select “Default” then press [Enter].
		Top	Right
6	Enter desired value using the cursor key, then	0.0"	0.0"
		Bottm	Left
	press [Enter].	0.0"	0.0"
7	Press [Exit] or RESET to save the default set-	Default	Enter
	ting.

Note: Press RESET to return to standby.

Note: If you set the default setting to ON, the Binding Margin icon will be appeared on the LCD.

2.26