Select “03. Copy Panel Reset” and then press [Enter].

Copy settings

02. Width of the separator line

Default setting: 0.01 inch

You can change the width of the separator line in the Combine and Repeat function.

The default setting is 0.01 inch, but you can change it to within 0.01 – 0.05 inch in 0.01 inch steps.

1 Press MENU, [Copy Set].

2 Select “E. User Settings” and then press [Enter].

3 Select “02. Separator Line Width” and then press [Enter].

6 Select “Reset after scan” and then press [Enter].

7 Select “ON” or “OFF” then press [Enter] to save the setting.

8 Press [Exit] to finish.

Press RESET to return to standby.

Copy Panel Reset

Use cursor to selectON or OFF.

ON

OFF

Enter

4 Enter the width of the separator line you want to set to default.

5 Press [Enter] to save the setting.

6 Press RESET to return to standby.

03. Auto reset mode

Separator Line Width

Set width of line.

0.01"

(0.01-0.05)

Line width

:0.01"

Enter

04. Last Job Hold Time

Default setting: 0 minute

Your machine can hold the last scanned data of copying for a certain period. You can change that time here.

Note: If it is 0 minute, the Last Job feature will not work. 1 Press MENU, [Copy Set].

2 Select “E. User Settings” and then press [Enter].

Default setting: Auto reset time: 3 minutes, Reset after scan: OFF

The machine returns to its initial condition automatically after a certain period of time. You can change this time from 1 to 10 minutes. Also, you can set the machine to return to its initial condition soon after finishing to scan.

Note: The machine first resets the LCD display, and after certain period of time it resets the key settings to the initial condition.

3 Select “04. Last Job Hold Time” and then press [Enter].

User Settings

Use cursor to selectitem.

01.Copy Scan Setting 02.Separator Line Width 03.Copy Panel Reset 04.Last Job Hold Time 05.Image Compress Mode

Enter

1 Press MENU, [Copy Set].

2 Select “E. User Settings” and then press [Enter].

3

4

5

Enter the time for holding the scanned data for the Last Job feature.

Press [Enter] to save the setting.

Last Job Hold Time Enter the hold time.

0

min.

(000-600)

 

 

 

� �

4 Select “Auto reset time” and then press [Enter].

5 Enter the time for auto resetting, and then press [Enter] to save the setting.

Copy Panel Reset

Set auto reset time.

After

3

min.

(1-10)

Auto reset time

: 3min.

Reset

after scan

: OFF

Exit

Enter

6

Press RESET to return to standby.

Enter

2.28

Page 48
Image 48
Muratec Fax Machine installation manual Width of the separator line, Auto reset mode, Last Job Hold Time