Muratec Fax Machine installation manual To create or modify an F-Code box, Box Name, Security Box

To create or modify an F-Code box:

1	Keep pen and paper with you as you follow these steps. As you decide on a
	sub-address and enter it into your machine, write it down. Remember to: (1)

write down which box goes with which sub-address, (2) write down any pass- words or I.D. codes you enter, (3) keep these printed records in a safe place.

If you chose Security:

7 The security box has the following settings:

• Box Name – You can enter the name for

this F-Code box.

		Advanced fax
01:Security Box		SetBox
Use cursor to select�
item.
Box Name	:
Sub-Address	:
Password	:

2 Press MENU, N, [Enter]. The LCD shows the F-Code box list.

3 Select the F-Code box you want to create or

N.F-Code Box

Enter box number. (01-50)

01:

02:

• ITU-Tsub-address– This is the numerical

identifier you must enter in order to commu-

nicate with any remote F-Code compatible

fax.

Hold Time	:00 Day
Exit	Enter

modify using the cursor key.

Note: You can select the F-Code box by directly entering that two-digit identi- fier number (01-50).

03:

04:

05:

Detail EraseBox Set Box

•	ITU-Tpassword – This is the password for ITU-T-compatible F-Code fax
	transactions. You don’t need to have a password for the F-Code box.
	However, using a password will make your F-Code communication much
	more secure.
•	Hold time – This setting is how long you want to keep a document stored

Started

Note: You can press [Detail] to see the number which has been pro- grammed in that speed-dial number.

in your machine’s F-Code box.

• I.D. code for this F-Code box – This is the four-digit I.D. code for the

4 Press [BoxSet].

What you do next depends on whether you’re creating or modifying the F-Code box:

If creating — skip to step 6.

If modifying — the LCD asks you to enter the proper I.D. code. The LCD shows (see right):

01:Security Box		SetBox
Enter I.D.code�
*	***
	01:AABBCC
02:DDEEFF
03:GGHHII
04:
05:
		Enter

box’s security, which you use to (1) print a document any remote F-Code-

compatible fax sends to this F-Code box or (2) you enter before you can

make any changes to this F-Code box. (See step 12.)

8 To enter the Box name:

Select “Box Name” using the cursor key, and then press [Enter].

Then, enter the name the same way you entered your fax name during

5 Use the numeric keypad to enter the 4-digit I.D.

code (not the ITU-Tsub-address and not the ITU-Tpassword) and then press [Enter].

•If you modifying the Security box, go to step 7.

•If you modifying the Bulletin box, skip to step 16.

•If you modifying the Relay box, skip to step 28.

Note: You cannot change the type of an existing F-Code box. If you’re modi- fying an existing F-Code box and want to change the box type, you first must erase the old box, then create a new one.

EasyStart. An F-Code box’s name can be up to 16 characters in length.

Note: To erase characters, press [Clear] to erase to the left.

To change just one character in the name, move the cursor to that character and then press [Clear] to erase it. Then re-enter the name correctly.

Press [Enter] to save the box’s name and continue.

9 To enter the ITU-Tsub-address:

Select “Sub-Address”using the cursor key, and then press [Enter].

Fax Features Getting

6 The fax machine is asking which box type you want to assign to this box — bulletin, security or relay.

Select desired box type using the cursor key and then press [Enter].

•If you chose Security, go to step 7.

•If you chose Bulletin, skip to step 16.

•If you chose Relay, skip to step 28.

01:Not Stored

Use cursor to select� box type.

Security Box

Bulletin Box

Relay Box

Enter

Then, use the numeric keypad to enter this box’s ITU-Tsub-address to identify this F-Code box.

The sub-address can be up to 20 characters in length and include any combi- nation of numbers and the * and # characters (but no other non-numeric characters).

Note: No other F-Code box in this machine can have the same sub-address as the one you enter here.

3.45