Muratec Fax Machine installation manual Erasing a Macro key, Printing a list of your Macro keys

Common settings

4 The LCD shows:

If you want to overwrite the operation already programmed, press [Yes].

If you do not want to overwrite the key you have chosen, press [No] and go back to step 2.

Macros

Over Write?

M1:AABBCC

M2:BBCCDD

M3:EEFFGG

M4:Not Stored

M5:Not Stored

9 The machine now asks you to name this job. Enter the name of this job.

A job’s name may be up to 130 characters in length.

If you do not want to enter or change this job’s name, skip to step 10.

Macros

TitleUpper case

_

Chara. Clear Enter

Yes	No
Copy Ready	Set 1

10 Press [Enter] to save the setting.

The machine will return to standby mode.

To program or modify another job, repeat steps 1–10.

5 The LCD of copy standby mode appears, which means the machine is ready to register the steps into the Macro key.

Note: It keeps beeping and blinking the COPY or FAX key during the job registration in order to make notice of the registration mode.

100%

Paper Zoom Sort

Erasing a Macro key

1 Press MACRO PROGRAM, NEXT.

2 Selecterase. the Macro key (M1 – M6) you want to

Macros

Select macro key.

M01:AABBCC

M02:BBCCDD

M03:EEFFGG

6 Press the keys exactly as you operate the job you want to program into the Macro key.

Note: If you want to program the fax function, first press FAX. Or, if you want to program the copier function, first press COPY.

M04:Not stored

M05:Not stored

Setting Erase List

Note: You can program up to 60 steps. When it comes over 60 steps, your fax machine asks if you register the operations you have entered. If you want to register them, press [Yes]. If not, press [No].

Note: If you want to cancel the operations you have set, press RESET and

then go back to step 1.

7 If you programmed Start or [Enter] into the operation, proceed to step 8.

3 Press [Erase]. The LCD shows:

Note: If you want to quit without erasing the Macro key you’ve selected, press [Cancel]. The fax will return to step 2.

4 Press [Erase] again to erase the job.

Macros

OK to erase?

M01:AABBCC

M02:BBCCDD

M03:EEFFGG

M04:Not stored

M05:Not stored

Cancel Erase

	Otherwise, press MACRO PROGRAM and skip to step 9.
8		Macros
	If you want to start immediately after pressing	Include Start/Enter?
	the Macro key when you use it, press [Yes]. If
	not, press [No].
	Note: If you want to confirm the settings or
	operations in the Macro key before the
	machine do it, press [No] here.	Yes	No

To erase another Macro key, repeat steps 2–4. Or press RESET to return to standby mode.

Printing a list of your Macro keys

Your fax machine can print a list of the commands you’ve stored in your Macro keys.

The list includes:

(1)each key’s Macro key number

(2)the name of the job stored in the Macro key

To print a list of Macro keys, press MACRO PROGRAM, NEXT, [List].

4.4