Muratec Fax Machine installation manual Getting Started, Password Px Protect, Auto Print Enter

18

19

20

To enter the ITU-Tsub-address:

This is same procedure in step 9. Please refer to step 9.

To enter the ITU-Tpassword:

This is same procedure in step 10. Please refer to step 10.

To set the Rx Protect:

Select “Rx Protect” using the cursor key, and then press [Enter].

Advanced fax

23 To set the Erase Tx Doc:

Select “Erase Tx Doc” using the cursor key, and then press [Enter].

Then, select desired setting “On” or “Off”.

On: Your machine erases the document from the box as soon as it sends it. If you choose “On”, this box can be polled only once per document.

Off: Your machine does not erase a document from the box when it’s polled. As long as your machine holds AC power and you do not erase the docu- ment from the box, the document is available indefinitely for polling.

21

Then, select desired setting “On” or “Off”.

On: Do not open this box to receive documents from callers.

Off: Open this box to receive documents from callers.

Press [Enter] to save the box’s name and continue.

To set the Auto Print:

Note: This setting is available only when the reception protection (Rx pro- tect) setting is set to off (see step 20).

24 Press [Exit].

The machine asks for your F-Code box’s four- digit security I.D. code. This is the I.D. code for the box’s security, which you use to (1) print a document any remote F-Code-compatible fax sends to this F-Code box or (2) you enter before you can make any changes to this F-Code box.

01:Bulletin Box			SetBox
Enter I.D.code�
0	000	:AABBCC
Box Name
Sub-Address		:12345678
Password		:
Px Protect		:OFF
Auto Print		:ON

Enter

Getting Started

22

Select “Auto Print” using the cursor key, and then press [Enter].

Then, select desired setting “On” or “Off”.

On: Print the document automatically when the box receives it.

Off: Print the document manually, when you want to print it.

Press [Enter] to save the box’s name and continue.

To set the Overwrite Doc:

Note: This setting is available only when the reception protection (Rx pro- tect) setting is set to off (see step 20).

Select “Overwrite Doc” using the cursor key, and then press [Enter].

Then, select desired setting “On” or “Off”.

On: When your machine receives a new document into this box, it will erase any documents currently stored in it.

Off: When your machine receives a new document into this box, it will not erase the documents stored in it. Your machine can store up to 30 documents (each document can include one or more pages) in each box.

Press [Enter] to save the box’s name and continue.

25 Decide on a four-digit I.D. code (0001-9999) for this F-Code box. Write it down, and put it in a safe place.

Important: Do not use 0000 as an I.D. code.

26 Use the numeric keypad to enter the four-digit I.D. code for this F-Code box. Important: After completing this step, you must know this code to access

this F-Code box. Be sure to write it down.

27 Press ENTER to save the F-Code box information.

To create or modify another F-Code box, go back to step 3. To finish, press RESET.

Fax Features

3.47