Muratec Fax Machine Auto power off mode, Adjust the sound settings, Auto Power Off Mode

Common settings

F. Auto power off mode

Your machine is initially set to be in the Auto power off mode automatically when the machine keeps to be in the Sleep mode for 60 minutes. If you want to change the time or to set the Auto power off mode to OFF, you can set it here.

Note: Pressing ENERGY SAVING for 3 seconds, your machine will be in the Auto power off mode immediately, regardless of this setting.

G. Adjust the sound settings

You can adjust or change the following sounds:

•	Fax Ringer — If you set this to “ON”, the ringer that alerts you when you
	receive a fax will be active even if you do not have the optional handset.
	Note: This setting is not available in Fax/Tel ready mode.
•	Volume — You can adjust the volume for fax ringer, alarm, key touch tone and
	complete beep.

1 Press MENU, [Mach Set].

2 Select “F. Auto Power Off Mode” using the cursor key. Then press [Enter].

Machine Settings

Use cursor to select item.

F.Auto Power Off Mode

G.Sound Settings

H.Paper for List

� �

J.Print Machine Setting L.Print Stored Doc. List

• Key Touch Tone — You can select the key touch tone for each mode, fax mode

and copy mode.

Note: When the optional scanner kit or network kit are installed to your

machine, you can also select the tones for them.

• Complete Beep — You can select the type of beep that alerts you when copy

printing, fax transmission/reception or fax printing were completed.

�Enter

3 Select “ON” or “OFF” using the cursor key. Then press [Enter].

Note: If you set it to OFF, your machine will return to standby mode.

• Paper Jam Alarm — If you set this to “OFF”, your machine will not sound an

alarm when the paper jam occurs.

Note: The alarm light will glow and the LCD will show the error message,

regardless of this setting.

4

Enter the time for the Auto power off mode using numeric keypad.

(30 - 120 min.)

Note: Your machine will be in the Auto power off mode when the time you set has passed after the Sleep mode starts.

F.Auto Power Off Mode

Enter start time. (30-120) After 060 min.

Enter

1 Press MENU, [Mach Set].

2 Select “G. Sound Settings” using the cursor key. Then press [Enter].

Machine Settings

Use cursor to select

� item.

�F.Auto Power Off Mode

G.Sound Settings

H.Paper for List

� �

J.Print Machine Setting L.Print Stored Doc. List

�Enter

5

Press [Enter].

3 Select the desired setting using the cursor key, and then press [Enter].

Fax Ringer — go to step 4.

Volume — go to step 5.

Key Touch Tone — go to step 6.

Complete Beep — go to step 8.

Paper Jam Alarm — go to step 10.

G.Sound Settings

Use cursor to select� item.

01.Fax Ringer 02.Volume 03.Key Touch Tone 04.Complete Beep 05.Paper Jam Alarm

Enter

4.8