Muratec Fax Machine PIN is not stored, Please set Fax/Tel Mode, Set Indiv Frwd #s first

Invalid protect passcode

No command stored

No document stored

No protect passcode

No report

Not stored

Not store in Relay box

Not store in Secure box

Would you like to enter?

The protection passcode you entered isn’t valid. Repeat the operation, entering the correct protec- tion passcode.

You pressed REVIEW COMMANDS to review

upcoming commands, but your fax machine had none stored.

You tried to print a document from memory, but your fax machine had none stored.

You tried to protect an operation or department code but there’s no protection passcode stored in your fax machine. Store a protection passcode in your machine, then retry protecting the operation or department code.

You requested an activity journal or confirma- tion report, but your fax machine has no record of any fax jobs having occurred.

You selected an autodialer, batch box or F-Code box number for which there is no phone number programmed. Either choose another number or dial a phone number directly from the numeric keypad.

. . . or . . .

You tried to turn on the department code setting but there are no department codes stored in your fax machine. Store at least one department code, then try again.

You tried to store a document for polling in an F-Code box which is set to be a relay box.

Select an F-Code box which is set to be a bulletin box, then try again.

You tried to store a document for polling in an F-Code box which is set to be a security box. Select an F-Code box which is set to be a bulletin box, then try again.

You pressed an empty one-touch key or speed dial number.

Press [Yes] to tell your machine to enter it, or press [No] to cancel entering.

		Just in case
PIN is not stored	You selected “Mode1” in the PIN mask feature
	and tried to call an autodialer number in which
	no PIN has been entered, or to call using
	numeric keypad without PIN. Enter a PIN, then
	try again.
Please set Fax/Tel Mode.	You tried to set the Fax Forwarding feature to
	ON when the reception mode is Tel Ready.
	Set the reception mode to Fax/Tel Ready.
Set Indiv Frwd #s first	You tried to set the Fax Forwarding feature to
	ON when all individual setting is set to OFF.
	Set the individual setting to ON.
Supply paper for fax doc.	Your machine receives a fax message when it
	does not have standard sized papers which can
	be used for the fax reception (refer to page 3.8),
	or the cassette is set to OFF for “Cassette for
	Rx” (refer to page 3.8). Add standard sized
	papers to the cassette, or set to ON for “Cassette
	for Rx”.
Unable to reduce	In enlargement transmission, you cannot select
	the reduction ratio.

Getting Started

Just in Case

5.13