Muratec Fax Machine installation manual Numbering pages, ReportTypeTCR, Report OFF

To set the printing one of these reports:

1 Press MENU, G, [Enter].

2 Select “ReportType” then press [Enter].

G.Journal & Reports

Use cursor to select� item.

Journal :OFF

Report :OFF

ReportType:TCR

Line up :OFF

Enter

Advanced fax

Numbering pages

Just before sending a fax, you can set your fax machine to number each page. This will help the person receiving the fax to keep track of all the pages.

To set up page numbering:

1 Count the number of pages in your document.

2 Set your document in ADF or FBS glass.

3 Select confirmation report type “TCR” or “RCR” by using the cursor key.

4 Press [Enter] to save the setting.

Report Type

Use cursor to select� TCR or RCR.

TCR

RCR

3 Adjust the resolution and contrast, if necessary.

4 Press NEXT until [#OfPages] is appeared.

5 Press [#OfPages].

Number of Pages

Enter num. of pages.(1-50)�1

Started

Enter

6 Use the numeric keypad to enter the number of pages in your document.

7 Press [Enter].

Getting

G.Journal & Reports

From here, continue sending the document using

Clear Enter

5 To print the selected report automatically after every fax you send, select “Report”, and then press [Enter].

Use cursor to select� item.

Journal :OFF

Report :OFF

ReportType:TCR

Line up :OFF

Enter

whatever type of transmission you need (broadcast, group dial, etc.). When the remote fax machine prints the document, a note on the right side of your TTI will indicate the number of the page — such as “P.02” for page two.

Fax Features

6		Report
	Select “ON” using the cursor key.	Use cursor to select�
		ON or OFF.
7	Press [Enter] to save the setting.	ON
		OFF

To turn the confirmation report feature on or off for
only the next fax transmission, press REPORT.	Enter

What happens next depends on the setting you chose:

•If the light next to the REPORT key glows, the fax machine will print the confirmation report automatically.

•If the light next to the REPORT key doesn’t glow, the fax machine will not print a confirmation report.

After you send this transmission, your machine returns to the setting you chose in step 2, above.

3.41