Muratec Fax Machine Sorting, When setting your document on the FBS glass, Non sort

Basic copy

Sorting

Your fax machine can sort copies in sequential order.

Non-Sort										Sort
1			1		2		3			1			1		1		1
2	3		1	1	2	2	3		3	2	3		2	3	2	3	2		3
Shift Non-Sort(Optional shift tray is required)										Shift Sort (Optional shift tray is required)
1					1					1				1
2		3			2		2			2		3		1			1
							2	2									2	3
Note: You can make up to 99 copies at a time.
Note: The output tray can hold the following number of sheets.
			Paper tray: 250 sheets
			Optional 2-Bin tray (Upper): 100 sheets
			Optional 2-Bin tray (Lower): 250 sheets
			If the number of sheets exceeds the capacity, remove the sheets.
Note: You cannot copy from multi-paper tray with this feature.
Note:			As a default, the non-sort is selected, You can change the default setting.

(See page 2.27.)

To copy with sorting:

1		Sort
	Press [Sort].	Use cursor to select.
	Note: “Shift Sort” and “Shift Non-Sort”	Non sort
	appears when your fax machine has the	Sort
	optional shift tray.	S-Non Sort
2		Shift Sort
	Select the sorting mode you want using the cur-	Enter
	sor key, and then press [Enter].

3 Enter the number of copies using numeric keypad.

4 Set your documents, and then press START.

When setting your document on the FBS glass:

1.Place the first page of your documents and then press START. The machine scans the first page.

Note: When making 1-sided copies, the first set will print.

2.Set the next page and then press START.

Note: Set the document in the same direction as step 1.

3.After the all pages of your document are scanned, press [Exit].

When setting your documents in the ADF:

1.Set your documents and then press START.

Note: When making 1-sided copies, the first set of copies comes out first.

2.When the machine is finished scanning, the copies will be printed.

2.6