Muratec Fax Machine installation manual Autodialing while using the PIN mask

Autodialing while using the PIN mask

Note: The following instructions presume you understand how to set and use your machine’s autodialer. If you need to review, see pages 3.11–3.23.

If you chose “Mode 1” — the PIN goes in

In Mode 1, before autodialing a number for the first time, you must add the PIN to the stored one-touch key or speed-dial number. Here’s how:

1		01:123-4567
	Begin by creating or changing an entry in the	Use cursor to select�
		item.
	autodialer. (See pages 3.11–3.23, if necessary.)
		Location:AABBCC
	While you’re setting this up, the machine asks
		Alt.No. :
	you to enter the PIN. The LCD shows:	GroupNo.:1,5
2	Select “PIN” and press [Enter].	PIN	:
		Exit	Enter
3	Use the numeric keypad to enter the four-digit
	passcode.
4		01:123-4567
	Press [Enter].	Enter PIN�
		_

Advanced fax

If you chose “Mode 2” — as you autodial, load the code

In this mode, you don’t have to add the PIN to the autodialer setting. Instead, you enter the PIN manually each time you autodial:

1	Dial the number as you normally would, using the autodialer.
2		Transmission
	Use the numeric keypad to enter the PIN.	Enter PIN.�
		_
3	Press [Enter].	01:AABBCC
	Your machine dials the number.

Note: If you select either Mode 1 or Mode 2 and will	Clear	Enter
be using batch transmission (see pages

3.26–3.28), you must store the PIN access code for the remote unit within the appropriate batch box. (See “Performing batch transmission while using the PIN mask,” page 3.64.)

Dialing from the numeric keypad while using the PIN mask

Getting Started

5	Use the numeric keypad to enter the desired	Location:AABBCC
		Alt.No. :
	PIN, up to eight characters in length.	GroupNo.:1,5
6	Press [Enter] to save the PIN.	PIN	:
		-	Clear	Enter
	Note: If you press [Enter] without entering

the PIN, the machine beeps, indicates “Invalid Number” on the LCD and then returns to step 5.

Now you may autodial the number as usual.

Important: While in PIN Mode 1, any autodialer numbers you use must include the PIN. This also applies to autodialer numbers used with batch

If you’ve specified Mode 1 — use “star” power

1 Enter the phone number, then press the

*(“star”) key and enter the PIN. The PIN always goes last.

For example, to dial 19725550911 with a PIN of “12345678”, enter 19725550911*12345678:

2 Press START. The PIN disappears from the dis- play, and your machine dials the desired phone number.

Transmission

Press START.� 19725550911*12345678_

Group Clear Broadcas

Fax Features

transmission (see pages 3.26–3.28) or programmable one-touch keys

If you’ve specified Mode 2 — the machine guides you

(see pages 3.54–3.60).

Note: If you select either Mode 1 or Mode 2 and will be using batch transmission, you must store the PIN access code for the remote unit within the appropri- ate batch box. (See “Performing batch transmission while using the PIN mask,” page 3.64.)

1 Enter the phone number as usual.

2 Press START. The LCD shows:

3 Use the numeric keypad to enter the PIN.

4 Press [Enter].

Your machine dials the number.

Transmission

Enter PIN.�

_

123-4567

Clear Enter

3.63