Muratec Fax Machine Continuous polling, Press MENU, D, Enter, Not Stored, PrintDoc EraseDoc Enter

Cont Polling

Enter fax number.�

_

Cont Polling

Enter end time.� 18:30

Cont Polling

Enter start time.� 14:20

When your machine polls for documents, it dials the number and, upon making con- tact with the other machine, begins receiving the document as if the other machine had placed the call.

Continuous polling

To set up your machine for continuous polling:

1 Press MENU, select “Cont Polling” and then press [Enter].

2 The LCD shows the current time:

Use the numeric keypad to enter the time your machine should begin the continuous polling. (Use the 24-hour format.)

3	When the start time is set, press [Enter] to
	save it.	Enter

4 Use the numeric keypad to enter the time when your machine should finish the continuous polling. (Use the 24-hour format.)

Note: If you set the end time earlier than the start time, the polling operation will con-

tinue until the selected end timeEnter tomorrow.

5 When the end time is set, press [Enter] to save it.

6 Enter the remote fax machine’s number by either pressing a one-touch key, entering a speed-dial number or using the numeric key- pad.

Advanced fax

8 Press [Enter] to save the number.

9 Press START.

When your machine polls for documents, it dials each number and, upon making contact with the other machine, begins receiving the document as if the other machine had placed the call. It will continue the process throughout the time period you selected in steps 2–5.

Note: When you want to end a continuous polling operation, you must delete it using the Job Review feature (see page 3.29).

Being polled

Not only can you poll, but you can also be polled. To set up a document for regular			Started
polling:
1	If your machine is set for Tel Ready reception, change the reception mode to		Getting
2	Insert the document.
	other mode. Your machine can’t be polled if it’s in Tel Ready mode.
3
	Adjust resolution and contrast if necessary. (Your fax machine will be trans-		Features
	mitting to the machine doing the polling.)
4	Press MENU, D, [Enter].	D.Polling
			Fax
	If you want to scan the duplexed documents,
	proceed to step 5.
	If you want to scan the mixed size documents,	Not Stored
	skip to step 7.
	Otherwise, skip to step 8.	PrintDoc EraseDoc Enter

If you are entering only one number for contin-
uous polling, skip to step 8.	Group	Clear Broadcas
To add additional fax numbers for this opera-
tion, go on to step 7.
7 To add additional fax numbers, press [Broadcas] between each one to insert a

5 Press NEXT, [Dup.Scan]. The LCD will show:

6 Select the binding position of your documents. Then press [Enter]. The duplex icon will appear. Skip to step 8.

D.Polling

Use cursor to select� bind position.

Right&Left

Top

comma then enter the number as in step 2. You can specify up to 30 numbers

(and/or call groups) for continuous polling.

Important: Do not insert a comma after the last fax number.

Note: If you enter characters by mistake, press [Clear] to erase them. Or press or of the cursor key to select the number then press [Clear].

7	Press NEXT, [Mix Size]. The Mix size icon will	▲	▼	Enter
	appear.

8 Press [StoreDoc]. Your machine will scan the document into memory and return to standby mode.

Once the remote fax machine polls the document you stored, your fax machine auto- matically erases the document from memory.

3.35