In this mode, the reduce/enlarge ratio will be set to “Auto” (automatically). If you want to set the reduction/enlargement ratio manually, set the ratio after setting the series copies function.
According to the size of document and recording paper you selected, a part of the image might be lacked.
This feature is available only with the FBS.

Series Copies

You can make one-sided copies from two facing pages of book documents.

Note:

Note:

Note:

1

 

 

 

Series Copy

 

Press MENU.

 

 

Use cursor to select.

 

 

 

 

 

Ratio:Auto

2

Select “Series Copy” using the cursor key, and

 

 

 

 

 

 

 

Orig.bound

 

then press [Enter].

 

 

 

 

 

 

 

L

R

3

Select the bound side of the book document

 

 

 

 

 

 

 

 

Paper

 

 

 

 

 

 

 

 

Letter

 

 

 

 

 

 

 

 

 

 

using the cursor key.

 

Paper

 

Cancel

Enter

 

If your book document type is read from left to

 

 

 

 

 

 

 

 

 

 

right, select “L”.

 

 

 

 

 

 

 

 

 

 

If your book document type is read from right to left, select “R”.

 

4

If you want to change the recording paper size, proceed to next step.

 

 

Otherwise, skip to step 6.

 

 

 

 

 

 

 

 

 

5

Press [Paper] to select the paper size, and then press [Enter].

 

6

Press [Enter] to save the setting.

 

 

 

 

 

 

 

 

 

7

The Series copy icon will be displayed on the

Copy Ready

 

 

Auto

Set 1

 

 

 

 

 

 

 

 

 

LCD.

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

Set the documents on FBS glass and press

 

 

 

 

 

 

 

 

 

 

 

 

Series Copy

START.

 

 

 

Setting complete

 

 

 

 

 

 

 

 

 

 

 

 

 

Paper

 

Zoom

Sort

Advanced copy

Erase center

Your machine can make copies with erasing the shadow at the center of the record- ing paper.

Note:

The default setting of the erased margin is 0.1 inch. You can change the

 

 

Features

Note: Your machine has three types of erasing shadow function, Erase Center,

 

 

 

 

Erase Border and TopUp Copy. You can use these functions at a time.

 

 

 

 

default setting. (See page 2.26.)

 

 

 

 

 

 

 

Copy

 

 

 

 

 

 

 

1

 

 

Erase Center

 

 

Press MENU.

 

Move cursor and enter

 

 

 

 

value.

 

 

(0.1-2.0)

 

 

2

Select “Erase Center” using the cursor key,

 

Document

 

 

 

 

 

and then press [Enter].

 

 

 

 

0.1"

 

 

 

3

Enter the center erased margin using the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

numeric keypad or pressing the and of the

 

 

Cancel

Enter

 

 

 

 

cursor key.

 

 

 

 

 

 

 

 

 

Note: You can specify the margin width as follows:

 

 

 

 

 

 

 

0.1″ to 2.0″ in 0.1″ steps.

 

 

 

 

 

 

 

 

4

Press [Enter] to save the setting.

 

 

 

 

 

 

 

 

5

The Erase center icon will be displayed on the

Copy Ready

100%

Set

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

LCD.

 

 

 

 

 

 

 

 

Set your documents, then press START.

 

 

 

 

 

 

 

 

 

Erase Center

 

 

 

 

 

Setting complete

 

 

Paper

Zoom

Sort

 

 

 

2.13

Page 33
Image 33
Muratec Fax Machine installation manual Series Copies, Erase center, Features, Copy