Muratec Fax Machine Programming a batch transmission, Programming an F-Code transmission

Press [Enter].

Press [Enter].

Programming a batch transmission

For this operation to work, two things must be true:

• The batch box you’re using must exist on your fax machine.

To program a batch transmission into a programmable one-touch key:

Advanced fax

Programming an F-Code transmission

For this operation to work, two things must be true:

• You must know how the remote fax is using each F-Code box to which you’re

transmitting — for example, as a security box or a relay box. Different fax manu-

facturers may use slightly different terms, but the concepts are the same.

1 Press MENU, C, [Enter].

The LCD shows the programmable one-touch number list.

C.Prog.One-Touch

Select p-one-touch.(79-84)

79:

80:

• You must know the remote fax’s ITU-Tsub-address and password for each box to

which you want to transmit.

To program an F-Code transmission into a programmable one-touch key:

2 Select the programmable one-touch number that you want to program or change.

81:

82: 83:

Detail Erase Enter

1 Press MENU, C, [Enter].

The LCD shows the programmable one-touch number list.

C.Prog.One-Touch

Select p-one-touch.(79-84)

79:

80:

Note: If you’re changing a previously stored command:

If your previous command for this key was a batch transmission and you want to keep this key programmed for a batch transmission, use these instructions to make changes.

2 Select the programmable one-touch number that you want to program or change.

81:

82: 83:

Detail Erase Enter

If you want to assign this key to a completely different operation, overwrite a previously stored command to the new one.

Note: If you’re changing a previously stored command:

If your previous command for this key was an F-Code transmission and you want to keep this key programmed for an F-Code transmis-

3 Press [Enter].

4 Do not enter any numbers and characters here.

5

79:

Enter fax number.�

_

sion, use these instructions to make changes.

If you want to assign this key to a completely different operation, overwrite a previously stored command to the new one.

3

79:

Fax Features Getting Started

				-	Clear	Enter
				Batch Tx
6	Select the batch box you want to assign to this			Use cursor to select�
				1:AABBCC		00/17:05
				batch box.
	programmable one-touch key.
7				2:BBCCDD		30/17:05
	Press [Enter].
				3:FFGGHH		15/14:20
				4:
8	The machine will return to step 2.			5:
						Enter
	Note: When the batch box transmission is
	programmed, the	and	symbol will appear in the programmable

one-touch number list on the LCD.

If you want to enter or change another key’s programming, repeat steps 2-8. If you do not want to enter or change any other key’s programming, press

4 Use the numeric keypad to enter the fax num- ber exactly as your machine should dial it, including whatever codes your phone system requires. The number can be up to 40 charac- ters in length.

5 Press [Enter].

6 Select “F-Code Tx” and press [Enter].

7 Use the numeric keypad to enter the ITU-Tsub- address for the box to which you want to send the document.

8 Press [Enter].

Enter fax number.�

_

- Clear Enter

F-Code Tx

Enter sub-address.�

_

SubAddress :

Password :

RESET. Your machine returns to standby mode.

Clear Enter

3.57