Muratec Fax Machine installation manual Common

Just in case

< Common >

What you see on the LCD		What it means/What to do
Call for service		The scanner lamp is dim or inoperable.
		Make repeated copies to help evaporate any
		internal moisture. If that doesn’t resolve the
		problem, call your authorized Muratec dealer or
		Muratec Customer Support.
Cannot register Macro key.		You cannot register "Last Job" feature to the
Please use Soft key.		Macro key. Assign it to a Soft key.
Carriage error		The mirror carriage of your machine has become
		inoperable. Call your authorized Muratec dealer
		or Muratec Customer Support.
Drum cartridge		Your machine can print about 500 more sheets.
is almost empty	500	It will count down the number of sheets which
		can be printed. Please contact your authorized
		Muratec dealer soon to purchase a new drum
		cartridge if you don’t already have one.
		Note: According to the resolution and document
		type, your machine may become not to print
		before the number of sheets on the LCD becomes
		to be “0”.
Not avail. with ADF		You tried to use the function which cannot be
		used in ADF. Use the FBS glass.
Please call service		The printer unit of your fax machine has become
		inoperable. Call your authorized Muratec dealer
		or Muratec Customer Support.
Please correct error first		You pressed the Start key when an error has
		occurred. Correct the error.
Please wait		Your fax machine’s printer is either warming up
		or busy. Please wait until the fax is finished
		printing and then re-try your command or opera-
		tion.
Printing		The command you’re trying to enter requires the
		use of the printer, which is already in use. Wait
		for the fax to finish printing, then try again.
Replace		Your drum cartridge doesn’t work.
drum cartridge		Your machine cannot print until it is replaced
		with a new drum cartridge.
		Replace it.

Scanner in use

Toner bottle
is empty	50

Toner is empty

Too many characters

Too many locations

Too many steps

OK to register?

#of stored page: XXX Keep these pages?

The command you’re trying to enter requires the use of the scanner, which is already in use. Wait for the fax to complete the scan, then retry the desired command.

Your machine is almost out of toner.

About 50 more sheets can be printed and your machine will count down the number of sheets which can be printed. Please contact your autho- rized Muratec dealer soon to purchase a new toner bottle if you don’t already have one.

Note: According to the resolution and document type, your machine may become not to print before the number of sheets on the LCD becomes to be “0”.

Your machine is out of toner.

Your machine cannot print until it is replaced with a new toner bottle.

Replace it.

You attempted to enter too many numbers or other characters in the current operation. Press [Cancel] to delete the extra characters, then try again. You may wish to review the oper- ation’s appropriate instructions.

You tried to enter department code more than

100.Your machine can store up to 100 depart- ment codes.

You tried to enter too many steps for a macro. You can enter up to 60 steps into a macro key. Press [YES] to tell your fax to register these steps, or press [NO] to cancel the registering.

During scanning of the document, the memory overflowed. Press [YES] to tell your fax to keep as many pages in memory as possible, or press [NO] to delete from memory all pages stored during this operation (but not previous opera- tions).

5.14