Muratec Fax Machine View the result of fax transaction, Printing a delayed command list

Advanced fax

4 Select the command you want to review or can- cel using the cursor key. Then press [Location] to see individual numbers within the broad- cast.

Reserved Transmission

Use cursor to select� command.

C001 15/21:30 L.A.Office

C002 15/21:40 Broadcast

B001 15/22:00 Batch Tx

C003 17/08:00 987-6543

C004 17/08:10 N.Y.Office

View the result of fax transaction

You can see the 100 most recent fax transactions and result of each transactions with the following information.

• Assigned number, starting each day at 001

• Remote location called (The destination name)

PrintDoc Location Erase

• Resolution mode

• Starting date and time

5

The LCD shows:

Note: Press [Location] again to return to the previous display.

Reserved Transmission

Use cursor to select� command.

001:N.Y.Office

002:L.A.Office 003:Chicago Office

• Duration, in minutes and seconds
•	Number of pages you sent or received
•	Result of the call — If preceded by an asterisk (*), this signifies an ECM commu-
	nication. Or, if preceded by #, this signifies an super G3 communication.

6

7

Select the location you want to cancel using the cursor key.

Press [Erase].

004:London Office 005:Paris Office

PrintDoc Location Erase

1 Press JOB REVIEW & COMM CANCEL.

Note: If the number next to “Comm. Result”

Job Review

Use cursor to select� item.

ReservedTransmission 12

If you want to cancel a different location, repeat steps 6–7.

If you do not want to cancel any more locations, press RESET. The machine will return to standby mode.

displays “000”, it means there are no reports in your machine.

Comm. Result	68
Out-of-paper Rx	9
Reserved Copy	5

Printing a delayed command list

Your machine can print a command list which tells you:

•The command’s identification number

•The phone number, or “remote location”

•The start time (this appears in a DD,HH:MM format)

•A “note” telling if the command is a polling or F-Codeoperation (see pages 3.34–3.36 for more on polling and 3.44–3.53 for more on F-Code communication).

To print a delayed command list, press MENU, F, [List].

Printing a stored document

Your fax machine can print out each document stored for delayed transmission. To print a stored document:

1 Press JOB REVIEW & COMM CANCEL.

2 Select “Reserved Transmission” and then press [Enter].

3 Select the command you want using the cursor key.

4 Press [PrintDoc]. Your machine will print a copy of the stored document.

2 Select “Comm. Result” and then press [Enter]. The LCD will show:

Note: Your machine’s LCD shortens the word Transmission to Tx and the Reception to Rx.

Note: The assigned number starting at 001 is assigned separately between Tx and Rx.

3 If you want to see the detailed result of each transaction, press [Detail].

The LCD will show:

Press [Detail] again to return to the previous display.

If you wish to exit this mode, press RESET.

Enter

Comm. Result

Use cursor to select� item.

012	Rx	L.A.Office
008	Tx	N.Y.Office
011	Rx	Paris Office
007	Tx	987-6543
006	Tx	876-5432

		Detail
Comm. Result
No.012	:Reception
L.A.Office
Resolution	:S-Fine
Start Time	:10/26 09:35
Comm. Time	:0'42'
Page	:10
Result	:*OK
	List	Detail

3.30