Muratec Fax Machine Department codes, Entering a department name, Entering a department code

Press MENU, [Mach Set], N, NEXT.

Common settings

N. Department codes

When the department code setting is activated, the machine reminds each user to enter the department code before sending a document or making copies. With this feature, the fax transaction time and the copy charge can be managed by depart- ment.

Entering a department name

You can enter a department name for each department number.

A department name may be up to 10 characters in length. You can send a fax or make a copy with entering this department name instead of the four-digit depart- ment code. (See “Select the department mode” on page 4.13.)

After you turn on this setting, assign specific code to your office’s machine users and tell them to enter these department codes before sending faxes or making copies.

You will set the followings for the department code feature:

•Department code

•Department ID

•Department code setting (On or Off)

•Department code protection

•Department mode

•Copy charge setting

Entering a department code

Your machine can hold up to 100 separate department codes.

To enter a department code:

N.Department Codes

Enter department code.�

1 Press MENU, [Mach Set], N, [Enter]. _ The LCD shows the department code list.

Note: If department code operation is pro-
tected (see page 4.13), the fax beeps
briefly and then returns to standby
mode. You will have to turn off the	Add	Clear	Enter
protection first, then repeat this step.
2 Use the numeric keypad to enter the four-digit department code, 0000–9999.
If you want to erase an existing entry in the department code list, press or

To enter a department name:

1

2 Press [Dept.ID].

The LCD shows the department code list.

3 Select the department code you want.

Note: If you want to erase an existing depart- ment ID, select it and press [Erase], [Yes].

4 Press [Enter].

5 Use the one-touch keys or the numeric keypad to enter the department ID. It may be up to 10 characters in length. Regarding entering char- acters, see page 1.15.

Note: If you want to erase characters, press [Clear].

Machine Settings

Use cursor to select

� item.

M�.EnergySave ReleaseTime

N.Department Codes

� �

�Dept.ID Erase Protect

N.Department Codes

Use cursor to select

�department code.

0010�

0020

0030

0040 � �

0050

� Erase Enter

N.Department Codes Enter department ID.

_

�

0010�

0020

0030

0040 � �

0050

� Clear Enter

	of the cursor key to select the number then press [Clear].
3	Press [Add] to entry in the department code list.
	If you want to enter another department code, repeat steps 2–3.
4	Press [Enter] to save the setting. The machine will return to standby mode.

Note: The lower case characters are not available here.

6 Press [Enter] to save the setting.

If you want to enter a department ID for another department code, repeat steps 3–6.

To finish, press RESET.

4.12