La Crosse Technology WS-9025U Dst Daylight Saving Time Setting, Time Reception On/Off Setting

DST (DAYLIGHT SAVING TIME) SETTING:

Flashing

Note: The DST default is “ON”, meaning that the received time will automatically be adjusted according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the DST “OFF”.

1.The digit “ON” will start flashing on the LCD.

2.Use the CH/+ key to turn OFF the DST function.

3.Confirm with the SET key and enter the Time Reception ON/OFF setting.

TIME RECEPTION ON/OFF SETTING:

Digits flashing

In area where reception of the WWVB time is not possible, the WWVB time reception function can be turn OFF. The clock will then work as a normal Quartz clock. (Default setting is ON).

1.The digit “ON” will start flashing on the LCD.

2.Use the CH/+ key to turn OFF the time reception function.

3.Confirm with the SET key and enter the 12/24-HOUR setting.

Note:

If the Time Reception function is turned OFF manually, the clock will not attempt any reception of the WWVB time as long as the Time Reception OFF function is activated.

The Time Reception and the “WWVB” icons will not be displayed on the LCD.

12/24-HOUR SETTING:

Flashing

The hour display can be selected to show hours in 12-hour or 24-hour settings. (Default 12-Hour)

1.Use the CH/+ key to toggle between “12H” or “24H”.

2.Confirm with the SET key and enter the Manual time setting.