Note: The date can only be set in conjunction with the selected month. For example, it is not possible to set the date 30 if the month of February is selected.
2.Press and release the SET key to exit the setting mode and switch back to the normal display mode.
EXIT THE MANUAL SETTING MODES
•To return to the normal display mode from anywhere in manual setting mode simply press the SNZ key anytime.
•If no keys are pressed for at least 15 seconds in setting mode, the
CHANGING THE DISPLAY MODE (DAY, SECONDS, AND TEMPERATURES)
There are 4 possible display modes to view the day, seconds, and temperatures. The indoor temperature/outdoor temperature/month&date/weekday is the default.
To change the display:
1.Press the + key. The display should now show the seconds/outdoor temperature/ month&date/weekday.
2.Press the + key a second time and the display will now show the indoor temperature/seconds/month&date/weekday.
3.Press the + key a third time and the display will now show the indoor temperature/outdoor
temperature/month&date/seconds.
Press the + key a fourth time and the display will return to the normal display.
ALARM SETTING
To enter into the alarm setting mode:
1.Hold the ALM key for 4 seconds. The hour digits start flashing.
2.Press and release the + key to set the hour.
3.Press and release the ALM key to set the minutes. The minute digits start flashing.
4.Press and release the + key to set the minutes.
5.Press and release again the ALM key to exit the Alarm setting mode or wait for 15 seconds automatic timeout.
11
