Lancom Systems LCOS 3.50 3.2.2 Configuration with WEBconfig

LANCOM Reference Manual LCOS 3.50  Chapter 3: Configuration and management

Configuration and manage-

ment

Management of multiple devices

LANconfig supports multi device remote management. Simply select the

desired devices, and LANconfig performs all actions for all selected devices

then, one after the other. The only requirement: The devices must be of the

same type.

In order to support an easy management, the devices can be grouped

together. Therefore, ensure to enable ’Folder Tree’ in the View menu, and

group the devices by ’drag an drop’ into the desired folders.

LANconfig shows only those parameters that are suitable for multi

device configuration when more than one device is selected, e.g. MAC

Access Control Lists for all LANCOM Wireless Access Points.

3.2.2 Configuration with WEBconfig

You can use any web browser, even text-based, for basic setup of the device.

The WEBconfig configuration application is integrated in the LANCOM. All

you need is a web browser in order to access WEBconfig.

Functions with any web browser

WEBconfig offers setup wizards similar to LANconfig and has all you need for

easy configuration of the LANCOM—contrary to LANconfig but under all

operating systems for which a web browser exists.

A LAN or WAN connection via TCP/IP must be established to use WEBconfig.

WEBconfig is accessed by any web browser via the IP address of the LANCOM,

via the name of the device (if previously assigned), or via any name if the

device has not been configured yet.

http://<IP address or device name>