LANCOM Reference Manual LCOS 3.50 Chapter 13: Server services for the LAN
290
Server services for the LAN
햶After you have set all the parameters, confirm the entries with OK. The
SYSLOG client is then entered with its parameters into the SYSLOG table.
Facilities
All messages from LANCOM can be assigned to a facility with the Facility
mapping button and then are written to a special log file by the SYSLOG cli-
ent with no additional input.
Example All facilities are set to 'local7'. Under Linux in the file
/etc/syslog.conf
the
entry
local7.* /var/log/lancom.log
writes all outputs of the LANCOM to the file
/var/log/lancom.log
.
Warning Error messages that do not affect nor mal opera-
tion of the device are sent to this level. WARNING
Information All messages that are purely informative in char-
acter are sent to this level (e.g. accounting infor-
mation).
NOTICE, INFORM
Debug Transfer of all debug messages. Debug mes-
sages generate a high data volume and interfere
with the normal operation of the device. They
should therefore be disabled during normal
operation and should only be activated for trou-
bleshooting.
DEBUG
Priority Meaning SYSLOG priority