LANCOM Reference Manual LCOS 3.50 Chapter 14: Virtual Private Networks—VPN
314
Virtual Private Networks—
VPN
14.5.6 Configuration with LANconfig
The section demonstrates how LANconfig can be used to configure a LAN-
LAN coupling with additional subnets. In this section, VPN gateway 1 will be
configured and then the configuration of gateway 2 with the help of
WEBconfig will be demonstrated.
햲When configuring VPN, access the “IKE param.” tab and create a new IKE
key for the connection:
햳Under the “General” tab, create a new entry in the list of Connection
parameters. Select the IKE key created earlier for this. PFS and IKE groups
can also be selected in the same way as IKE and IPSec proposals from the
options prepared earlier.
햴You should then generate a new entry in the Connection list with the name
of the remote gateway as “name for the connection”. For the “Remote
10.1.0.0/16
10.2.0.0/16
10.3.0.0/16
LAN router 3: 10.1.0.3
LAN router 2: 10.1.0.2
Gateway 1:
gw1.dyndns.org
10.4.0.0/16
10.5.0.0/16
LAN router 5: 10.4.0.5
Gateway 2:
gw2.dyndns.org