Lancom Systems LCOS 3.50 5.2 Trace informationfor advanced users

LANCOM Reference Manual LCOS 3.50  Chapter 5: Diagnosis

Diagnosis

Under the general information you can watch the transmission rates at

which data is currently being exchanged with the Internet.

햴To break the connection manually, click on the active channel with the

right mouse button. You may be required to enter a configuration pass-

word.

햵If you would like a log of the LANmonitor output in file form, select

Device  Properties and go to the 'Logging' tab. Enable logging and

specify whether LANmonitor should create a log file daily, monthly, or on

an ongoing basis.

5.2 Trace information—for advanced users

Trace outputs may be used to monitor the internal processes in the router dur-

ing or after configuration. One such trace can be used to display the individual

steps involved in negotiating the PPP. Experienced users may interpret these

outputs to trace any errors occurring in the establishment of a connection. A

particular advantage of this is: The errors being tracked may stem from the

configuration of your own router or that of the remote site.

The trace outputs are slightly delayed behind the actual event, but are

always in the correct sequence. This will not usually hamper interpre-

tation of the displays but should be taken into consideration if making

precise analyses.

Trace output can be started in a Telnet session, for example. The command to

call up a trace follows this syntax:

trace [code] [parameters]

The trace command, the code, the parameters and the combination com-

mands are all separated from each other by spaces. And what is the meaning

of these codes and parameters?