Table of Contents

Section 1: Assembly & Set-up

Land Pride

Quick Change Rotor

Attach a chain, cable or lifting strap to the two Overseeder sling brackets. Use an overhead hoist for the rotor installation. Raise Overseeder.

Refer to Figure 1-2:

Complete steps 1 to 4 if your Overseeder comes equipped with a gauge wheel drive. Skip to step 5 if it does not have gauge wheels.

1.Remove chain cover (#1) on the right hand side by removing 1/4” x 1/2” long bolts (#2).

2.Disconnect right hand spring loaded gauge wheel link (#3) from the right hand gauge wheel arm (#4) by removing 5/8” x 2 1/2” long bolt (#5) and 5/8” nut (#6).

3.Remove drive wheel chain.

4.Remove cotter pin (#7) that retains the right hand gauge wheel arm and remove gauge wheel arm assembly. Be careful not to loose any components.

Refer to Figure 1-3:

5.Remove right hand bearing mount plate (#1) from Overseeder main frame.

6.Separate right hand bearing cover (#2) from right hand bearing mount plate (#1).

7.Between these two parts (#1 & #2) are two bearing mount gaskets (#4). Place one of these bearing mount gaskets between the bearing mount (#3) and the bearing mount plate (#1).

8.Then place the other bearing mount gasket between bearing mount plate (#1) and bearing cover (#2).

9.Retain these parts with 1/2” x 1 3/4” long bolts (#5), 1/2” lock washers (#6) and 1/2” hex nuts (#7). Hand tighten nuts at this time. Final torquing of these bolts will be later in the assembly process.

10.Check to make sure set screws in the hub inside the bearing mount (#3) are loose so it is free to rotate on the rotor shaft.

Refer to Figure 1-4:

11.Lift Overseeder high enough to roll rotor into position under the Overseeder frame.

12.With rotor properly positioned, slowly lower Overseeder making sure the right hand bearing mount plate (#1) is to the outside of the right hand frame end panel.

Refer to Figure 1-5:

13.Connect rotor to rotor drive hub (#1) on the left hand side using 7/16” x 1” long bolts (#3) and 7/16” lock washer (#2). Leave bolts loose.

Refer to Figure 1-4:

14.Connect right hand bearing mount plate to the Overseeder main frame using 1/2” x 1 1/4” bolt (#2), 1/2” lock washer (#3) and 1/2” hex nut (#4). Draw nuts up snug, do not tighten.

14594

Gauge Wheel Drive Disassembly

Figure 1-2

14592

Bearing Mount Plate & Rotor Assembly (RH Side)

Figure 1-3

14703

Rotor to Overseeder Assembly (RH Side)

Figure 1-4

14645

Rotor to Overseeder Installation-Left Hand Side

Figure 1-5

10 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M

2-16/09

Page 12
Image 12
Land Pride OS1548, OS1572 Quick Change Rotor, Gauge Wheel Drive Disassembly, Bearing Mount Plate & Rotor Assembly RH Side

OS1572, OS1548 specifications

The Land Pride OS1548 and OS1572 are outstanding implements designed to enhance the efficiency and productivity of landscape and turf maintenance. These models are part of Land Pride's lineup of high-quality equipment, built for durability and performance.

One of the main features of the OS1548 and OS1572 is their robust construction. Each model is meticulously crafted using high-strength steel, which gives them a solid framework that can withstand rigorous daily use. This durability is complemented by high-quality welds and a corrosion-resistant finish, ensuring that these implements will serve users well over the years, even in challenging environments.

Both models are equipped with a high-capacity hopper that makes them suitable for all types of seed and fertilizer applications. The OS1548 has a 48-inch working width, while the OS1572 boasts a larger 72-inch width. This variety allows operators to choose a model that best fits their specific needs, whether for residential or commercial use. The ample hopper capacity allows for extended work periods without constant refilling, maximizing efficiency and minimizing downtime.

The OS1548 and OS1572 come with a unique broadcasting system that ensures even distribution of seeds and fertilizers across the treated area. This is crucial for achieving uniform growth and maximizing the effectiveness of inputs. The finely tuned spread pattern also reduces waste and ensures that materials are used economically.

Another innovative feature of these models is their user-friendly design. They come equipped with adjustable settings that allow operators to easily control the flow rate of the materials being spread. This feature is particularly beneficial for tasks that require precision, such as overseeding or applying specific fertilizers.

Both models are designed for versatility, capable of tackling various landscaping tasks. Whether you're preparing a new lawn, refreshing a garden bed, or maintaining a sports field, the OS1548 and OS1572 deliver exceptional results.

In conclusion, the Land Pride OS1548 and OS1572 are exceptional implements that combine strength, efficiency, and user-friendly features. With their robust construction, high capacity, and precise broadcasting system, they are ideal for anyone looking to enhance their landscaping capabilities. These models exemplify Land Pride's commitment to quality and innovation in turf management equipment.