Table of Contents

Section 4: Maintenance & Lubrication

Land Pride

Overseeders With Rear Roller Drive

Refer to Figure 4-3:

a.Remove rear roller drive chain from speed change sprocket to rear roller sprocket.

26726

Rear Roller Drive Disconnect

Figure 4-3

Refer to Figure 4-4:

4.Remove right hand side or rotor from Overseeder by removing 1/2” x 1 1/4” bolts (#2), lock washer (#3), hex nut (#4) and then right hand bearing mount plate (#1) from Overseeder main frame.

14703

Right Hand Rotor Disassembly

Figure 4-4

Refer to Figure 4-5:

5.Disconnect left hand side of rotor from rotor drive hub (#1) by removing 7/16” x 1” long bolts (#3) and 7/16” lock washers (#2).

14645

Left Hand Rotor Disassembly

Figure 4-5

Refer to Figure 4-6:

6.Remove bearing mount plate (#1) from bearing housing assembly (#4). Take care not to damage the gaskets (#2) on either side of the right hand bearing mount plate.

7.Remove snap ring (#3) and bearing (#4) from the rotor shaft.

8.Loosen two set screws (#5) in seal guard hub (#6) and slide hub off the rotor shaft.

9.Clamp rotor shaft on one of the knife mounting flanges and, using a spanner wrench, unscrew (left-hand threads) non-drive rotor flange (#7).

NOTE: The threads on the non-drive rotor flange are left-handed threads.

10.Slide knife mounting flanges (#8) and spacers (#9) off rotor shaft.

11.Replace knives (#12) as needed using new 7/16” lock nuts, Land Pride part no. 803-108C. Torque nuts to 68 ft-lbs.

NOTE: The spiral arrangement of the knives needs to be reassembled in the same manner.

14700

Rotor Bearing and Knife Removal

Figure 4-6

12.Inspect bearing and seal for wear and replace if necessary.

13.Reassemble spacers and knife mounting flanges in the same spiral pattern as they were before disassembly.

NOTE: The knives should all be on the right side of the mounting flanges as viewed from the rear of the Overseeder.

14.Reassemble non-drive rotor flange (#7). Using a spanner wrench, torque to 985 ft-lbs. Remember: These are left-handed threads.

15.Slide seal guard hub onto the rotor shaft and leave set screws loose.

32 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M

2-16/09

Page 34
Image 34
Land Pride OS1548, OS1572 manual Overseeders With Rear Roller Drive Refer to Figure, Rear Roller Drive Disconnect

OS1572, OS1548 specifications

The Land Pride OS1548 and OS1572 are outstanding implements designed to enhance the efficiency and productivity of landscape and turf maintenance. These models are part of Land Pride's lineup of high-quality equipment, built for durability and performance.

One of the main features of the OS1548 and OS1572 is their robust construction. Each model is meticulously crafted using high-strength steel, which gives them a solid framework that can withstand rigorous daily use. This durability is complemented by high-quality welds and a corrosion-resistant finish, ensuring that these implements will serve users well over the years, even in challenging environments.

Both models are equipped with a high-capacity hopper that makes them suitable for all types of seed and fertilizer applications. The OS1548 has a 48-inch working width, while the OS1572 boasts a larger 72-inch width. This variety allows operators to choose a model that best fits their specific needs, whether for residential or commercial use. The ample hopper capacity allows for extended work periods without constant refilling, maximizing efficiency and minimizing downtime.

The OS1548 and OS1572 come with a unique broadcasting system that ensures even distribution of seeds and fertilizers across the treated area. This is crucial for achieving uniform growth and maximizing the effectiveness of inputs. The finely tuned spread pattern also reduces waste and ensures that materials are used economically.

Another innovative feature of these models is their user-friendly design. They come equipped with adjustable settings that allow operators to easily control the flow rate of the materials being spread. This feature is particularly beneficial for tasks that require precision, such as overseeding or applying specific fertilizers.

Both models are designed for versatility, capable of tackling various landscaping tasks. Whether you're preparing a new lawn, refreshing a garden bed, or maintaining a sports field, the OS1548 and OS1572 deliver exceptional results.

In conclusion, the Land Pride OS1548 and OS1572 are exceptional implements that combine strength, efficiency, and user-friendly features. With their robust construction, high capacity, and precise broadcasting system, they are ideal for anyone looking to enhance their landscaping capabilities. These models exemplify Land Pride's commitment to quality and innovation in turf management equipment.