Land Pride OS1572, OS1548 manual Rear Roller Assembly, Gauge Wheel Drive, Rear Roller Drive

Models: OS1572 OS1548

1 52
Download 52 pages 53.22 Kb
Page 13
Image 13

Land Pride

Table of Contents

Section 1: Assembly & Set-up

15.Torque all bolts to the proper specifications, see Torque Values Chart in the “Appendix” starting on Page 48. Tighten bolts in the following order:

a.Rotor to rotor drive hub.

b.Bearing mount plate to Overseeder main frame.

c.Bearing cover thru bearing mount plate to bearing mount.

16.Position hub inside bearing mount against bearing seal and tighten set screws.

17.Add grease to right hand bearing by using grease zerk located on the right hand bearing cover.

18.Reassemble gauge wheel & drive chains. Reattach chain guard.

Rear Roller Assembly

Refer to Figure 1-6:

1.Attach packer wheel assembly (#1) to back of Overseeder frame using 1” x 3 11/16” long clevis pins (#2), 1” flat washers (#3) and 3/16” x 1 3/4” long cotter pins (#4). If your Overseeder has a rear roller drive, see Rear Roller Drive below and skip step 2.

2.Attach support chains (#5) to back of frame and to packer wheel arms using 5/16” utility clevises (#6).

Gauge Wheel Drive

Refer to Figure 1-7:

1.Bolt drive spindle and hub assembly (#1) to the right hand gauge wheel arm (#2) using 5/16” x 1 1/2” long bolts (#3) and 5/16” lock nuts (#4).

2.Install wheel assembly (#5) to right hand wheel hub with 1/2” x 1 3/8” long lug bolts (#6) and 1/2” lug nuts (#7). Follow the same steps for the left hand side, except use non-drive spindle and hub assembly (#8) and bolts (#6).

IMPORTANT: Roller chains must be installed on the seeder at the correct gear ratio. Refer to Seeding Adjustments in the “Adjustments” section starting on Page 18 to determine correct chain installation.

3.Bolt chain guard (#9) to the right hand frame end plate using 1/4” x 1/2” long bolts (#10).

Rear Roller Drive

Refer to Figure 1-8:

1.Attach solid links (#1) to back of frame with 5/8” x 2 3/4” long bolts (#2) on top and 5/8” x 1 3/4” bolts (#4) on the bottom.

IMPORTANT: Roller chains must be installed on the seeder at the correct gear ratio. Refer to Seeding Adjustments in the “Adjustments” section starting on Page 18 to determine correct chain installation.

2.Bolt chain guard (#9) to end plate using 5/16” x 6” bolt (#10), 5/16” lock washer (#11) and 1/4” x 1/2” bolts (#12).

3.If rear roller (#13) is in the short arm position as shown, attach front chain guard (#7) and rear chain guard (#6) with 5/16” x 2 1/2” bolts (#8) in the locations shown.

14599

Rear Roller Installation

Figure 1-6

14598

Gauge Wheel Drive Assembly

Figure 1-7

14601

Rear Roller Drive Assembly with Short Arm

Figure 1-8

2-16/09

OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M

11

Page 13
Image 13
Land Pride OS1572, OS1548 manual Rear Roller Assembly, Gauge Wheel Drive, Rear Roller Drive

OS1572, OS1548 specifications

The Land Pride OS1548 and OS1572 are outstanding implements designed to enhance the efficiency and productivity of landscape and turf maintenance. These models are part of Land Pride's lineup of high-quality equipment, built for durability and performance.

One of the main features of the OS1548 and OS1572 is their robust construction. Each model is meticulously crafted using high-strength steel, which gives them a solid framework that can withstand rigorous daily use. This durability is complemented by high-quality welds and a corrosion-resistant finish, ensuring that these implements will serve users well over the years, even in challenging environments.

Both models are equipped with a high-capacity hopper that makes them suitable for all types of seed and fertilizer applications. The OS1548 has a 48-inch working width, while the OS1572 boasts a larger 72-inch width. This variety allows operators to choose a model that best fits their specific needs, whether for residential or commercial use. The ample hopper capacity allows for extended work periods without constant refilling, maximizing efficiency and minimizing downtime.

The OS1548 and OS1572 come with a unique broadcasting system that ensures even distribution of seeds and fertilizers across the treated area. This is crucial for achieving uniform growth and maximizing the effectiveness of inputs. The finely tuned spread pattern also reduces waste and ensures that materials are used economically.

Another innovative feature of these models is their user-friendly design. They come equipped with adjustable settings that allow operators to easily control the flow rate of the materials being spread. This feature is particularly beneficial for tasks that require precision, such as overseeding or applying specific fertilizers.

Both models are designed for versatility, capable of tackling various landscaping tasks. Whether you're preparing a new lawn, refreshing a garden bed, or maintaining a sports field, the OS1548 and OS1572 deliver exceptional results.

In conclusion, the Land Pride OS1548 and OS1572 are exceptional implements that combine strength, efficiency, and user-friendly features. With their robust construction, high capacity, and precise broadcasting system, they are ideal for anyone looking to enhance their landscaping capabilities. These models exemplify Land Pride's commitment to quality and innovation in turf management equipment.