![](/images/new-backgrounds/1104555/10455575x1.webp)
Table of Contents
Section 4: Maintenance & Lubrication
Land Pride
OS1572 4-Plate Disassembly
![](/images/new-backgrounds/1104555/10455575xi2.webp)
Step 1
Remove snap ring.
Step 2
Remove backup ring, lock collar, compression spring, bottom backup ring, and balls.
Step 3
Tighten the four hex nuts uniformly until the clutch pack and hub are loose.
Step 4
Bend all four retaining lugs out on the edge of the clutch housing.
Step 5
Remove the thrust plate with the Belleville Springs and lug rings to access friction disks and hub for inspection or service.
Step 6
Inspect friction disks and hub.
14232
14233
OS1572 4-Plate Assembly
Step 1
Place the hub and friction disks into the housing.
Step 2
Compress the Belleville Springs to the pressure plate by tightening the four hex nuts and then placing the assembly into the clutch housing.
Step 3
Bend the retaining lugs inward over the Belleville Spring edges to secure the spring before backing the four hex nuts off.
Step 4
With the lugs bent in, loosen the four hex nuts completely to the end of the threaded studs.
Step 5
Insert greased balls.
Step 6
Install bottom backup ring, compression spring, lock collar, and top backup ring.
Step 7
Install snap ring.
36 OS1548 and OS1572 Overseeder (S/N 166724+) |