Table of Contents

Section 2: Adjustments

Center and Wing Section Leveling

These adjustments should be made with your cutter hooked up to the same tractor that will be used for field operations or one having the same drawbar height. Adjust leveling rods as described below.

Refer to Figure 2-1 & Figure 2-2:

6.Lower wings to ground position. Wing sections will need adjusting if wing top deck sheets are not level with center top deck sheet. Level right side by loosening jam nut (#5) and rotating adjusting turnbuckle (#6) until right wing is level with center section. Re-tighten jam nut (#5). Repeat procedure to level left wing deck.

1.Attach cutter to tractor and position it on level ground.

2.Raise both wings to locked position.

3.Using hydraulic lift, adjust center deck height so that the front skids (#2) are 2 to 3 inches above ground.

NOTE: Lengthening leveling rods with adjusting nuts (#4) will lower the front of the cutter.

4.Measure right and left hand sides of the center section from ground line to center line of hinge rods (#1). The hinge rods should be 1” closer to the ground at the front than they are at the back. If they are not, loosen both jam nuts (#3) and rotate adjusting nuts (#4) at the same time until the right and left hand sides are inclined from front to back by 1”.

5.Be sure that both sides are equal distance from ground line to center line of hinge rod and that left and right leveling rods have equal tension. Re-tighten jam nut (#3).

23574

Front Skid

Front Skid Position

Figure 2-1

Cutting Height Adjustment

Refer to Figure 2-2:

Stroke control spacers are supplied to accommodate various cutting heights. Remove or add control spacers to the cylinder rod by spreading them apart at the break line. Removing spacers lowers the deck and adding spacers raises the deck.

 

1

Stroke Control

5

Spacers

6

 

 

4

 

3

Jam

 

4

Right Hand

 

 

Leveling Rod

3

 

Jam

 

Left Hand

 

Leveling Rod

22152

Center Section Leveling Rod

Figure 2-2

16 RC5020 (540 RPM) and RCM5020 (1000 RPM) Rotary Cutters 318-474M

2/02/09

Page 18
Image 18
Land Pride RCM5020, RC5020 Center and Wing Section Leveling, Cutting Height Adjustment, Adjustments, Refer to -1 & Figure

RC5020, RCM5020 specifications

The Land Pride RC5020 is a robust rotary cutter designed for agricultural and commercial applications, addressing the need for efficient vegetation management and land maintenance. This machine stands out in its class due to its exceptional durability and innovative features tailored for performance and reliability.

One of the key characteristics of the RC5020 is its heavy-duty construction. Built with a 10-gauge steel deck, it provides exceptional strength and longevity, capable of handling tough cutting conditions. The reinforced blade mounting system ensures maximum blade support, while the ΒΌ-inch thick side skirts add a layer of protection against debris and wear. This rugged structure enables users to tackle dense grass, brush, and other challenging vegetation without compromising performance.

The RC5020 is equipped with a powerful drive system that employs a smooth-running gearbox, ensuring efficient power transmission from the tractor to the cutter. This technology allows for a consistent performance and superior cutting ability, reducing downtime and maintenance needs. The machine features a quick-change blade system, enabling operators to easily replace blades when necessary, further enhancing productivity.

Versatility is another hallmark of the RC5020, as it can be operated with various tractor sizes, making it an excellent choice for both small farms and larger agricultural operations. With a cutting width of 20 feet, it efficiently covers large areas, minimizing the time needed for mowing and land clearing. The cutter also boasts an adjustable cutting height, allowing users to set the machine to their specific requirements, whether it be trimming grasses or cutting back invasive brush.

Safety features are integrated into the design of the RC5020, ensuring operator protection. These include a heavy-duty chain guard that minimizes the risk of flying debris and a unique safety latch designed to keep the cutter securely closed during transport. Additionally, the easy-access maintenance points make routine inspections and servicing quick and straightforward.

In summary, the Land Pride RC5020 rotary cutter combines robust construction with advanced technology, making it an essential tool for anyone needing effective land management. Its versatility, efficient performance, and safety features make it an ideal choice for agricultural professionals and property owners alike. Whether for mowing grass or clearing larger brush areas, the RC5020 proves to be a reliable and powerful ally in maintaining landscapes with ease and efficiency.