Land Pride

Table of Contents

Section 3: Operating Instructions

Pre-Start Checklist

Hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training involved in the operation, transport, maintenance and storage of the Rotary Cutter. Therefore, it is absolutely essential that no one operates the cutter without first having read, fully understood and become totally familiar with the Operator’s Manual. Make sure the operator has completed the Operating Checklist below.

Operating Checklist

 

Check

 

Page No.

 

 

 

 

 

 

 

Read and follow all Safety Rules & Safety Decals

 

 

 

 

carefully. Refer to “Important Safety Information”.

 

Page 1

 

 

 

 

 

 

 

Make sure all guards and shields are in place.

 

Page 1

 

 

Refer to “Important Safety Information”.

 

 

 

 

 

 

 

 

 

Read and follow Hook-up & preparation instructions.

 

 

 

 

Refer to “Section 1: Assembly and Set-up”.

 

Page 11

 

 

 

 

 

 

 

Read and follow all operating procedures.

 

Page 17

 

 

Refer to “Section 3: Operating Instructions”.

 

 

 

 

 

 

 

 

 

Read and make all required adjustments.

 

 

 

 

Refer to “Section 2: Adjustments”.

 

Page 16

 

 

 

 

 

 

 

Read and follow all Maintenance Instructions.

 

 

 

 

Refer to “Section 5: Maintenance & Lubrication”.

 

Page 24

 

 

 

 

 

 

 

Read and follow all Lubrication Instructions.

 

Page 30

 

 

Refer to “Lubrication Points”.

 

 

 

 

 

 

 

 

 

Make sure all gearboxes are properly lubricated.

 

 

 

 

Refer to Gearbox lubrication.

 

Page 31

 

 

 

 

 

 

 

Check cutter initially and periodically for loose bolts

 

 

 

 

and pins. Refer to “Torque Values Chart”.

 

Page 40

 

 

 

 

 

Inspection Procedures

!DANGER!

Do not engage tractor PTO while hooking-up and unhooking the driveline or stand near a rotating driveline. A person’s body and/or clothing can become entangled in the driveline resulting in serious injury or death.

5.Place tractor gear selector in park, shut tractor engine off, remove switch key and dismount from tractor.

6.Check cutting blades for sharpness. Refer to “Cutter Blade Maintenance” on page 24.

7.Inspect tractor safety equipment to make sure it is in good working condition.

8.After completing inspection and making any necessary repairs, remove supports from under the deck and wing transport locks. Lower wings level with center deck and then lower Rotary Cutter down to about 2" off the ground.

The remaining inspections are made by engaging the PTO to check for normal operation.

!CAUTION!

Tractor PTO shield and all Rotary Cutter guards must be in place at all times during operation!

IMPORTANT: Stop PTO immediately if vibration continues after a few revolutions during start-up and anytime it occurs thereafter. Wait for PTO to come to a complete stop before dismounting from tractor to check for probable causes. Make necessary repairs and adjustments before continuing on.

IMPORTANT: Do not exceed the cutter’s rated PTO speed. Excessive engine speed will damage the power train components.

9.Start tractor, set throttle to idle or slightly above idle and slowly engage PTO. Initial start-up vibration is normal and should stop after a few revolutions. Stop PTO rotation immediately if vibration continues.

10.Once cutter is running smoothly, increase tractor PTO speed to the appropriate rpm. Stop PTO rotation immediately if vibration occurs.

11.Investigate the cause of vibration if it does occur. Make sure cutter blades are not locked against each other. See “Field Set-up” on page 19.

!CAUTION!

Always disengage PTO, engage parking brake, shut tractor engine off, remove switch key and wait for blades to come a complete stop before dismounting from tractor.

1.Make sure tractor PTO is disengaged and cutter blades have come to a complete stop.

2.Park tractor and cutter on a level surface.

3.Raise and lock wings in the folded-up position with transport locks. See “Transport Locks” on page 18.

4.Raise center deck fully up and place sturdy support blocks or jack stands under the four deck corners. Lower center deck down onto the supports.

2/02/09

RC5020 (540 RPM) and RCM5020 (1000 RPM) Rotary Cutters 318-474M

17

Page 19
Image 19
Land Pride RC5020, RCM5020 manual Pre-Start Checklist, Operating Checklist, Inspection Procedures, Operating Instructions

RC5020, RCM5020 specifications

The Land Pride RC5020 is a robust rotary cutter designed for agricultural and commercial applications, addressing the need for efficient vegetation management and land maintenance. This machine stands out in its class due to its exceptional durability and innovative features tailored for performance and reliability.

One of the key characteristics of the RC5020 is its heavy-duty construction. Built with a 10-gauge steel deck, it provides exceptional strength and longevity, capable of handling tough cutting conditions. The reinforced blade mounting system ensures maximum blade support, while the ΒΌ-inch thick side skirts add a layer of protection against debris and wear. This rugged structure enables users to tackle dense grass, brush, and other challenging vegetation without compromising performance.

The RC5020 is equipped with a powerful drive system that employs a smooth-running gearbox, ensuring efficient power transmission from the tractor to the cutter. This technology allows for a consistent performance and superior cutting ability, reducing downtime and maintenance needs. The machine features a quick-change blade system, enabling operators to easily replace blades when necessary, further enhancing productivity.

Versatility is another hallmark of the RC5020, as it can be operated with various tractor sizes, making it an excellent choice for both small farms and larger agricultural operations. With a cutting width of 20 feet, it efficiently covers large areas, minimizing the time needed for mowing and land clearing. The cutter also boasts an adjustable cutting height, allowing users to set the machine to their specific requirements, whether it be trimming grasses or cutting back invasive brush.

Safety features are integrated into the design of the RC5020, ensuring operator protection. These include a heavy-duty chain guard that minimizes the risk of flying debris and a unique safety latch designed to keep the cutter securely closed during transport. Additionally, the easy-access maintenance points make routine inspections and servicing quick and straightforward.

In summary, the Land Pride RC5020 rotary cutter combines robust construction with advanced technology, making it an essential tool for anyone needing effective land management. Its versatility, efficient performance, and safety features make it an ideal choice for agricultural professionals and property owners alike. Whether for mowing grass or clearing larger brush areas, the RC5020 proves to be a reliable and powerful ally in maintaining landscapes with ease and efficiency.