Table of Contents

Section 1: Assembly and Set-up

Land Pride

Hitch Types

The cutter is factory supplied with a standard clevis hitch. The optional pintle hitch is also available. See your nearest Land Pride dealer should you want to change your hitch set-up.

Standard Clevis Hitch

Refer to Figure 1-2:

A level rod attached to the underside of the clevis keeps the clevis parallel with the tractor drawbar at all cutting heights. Cutter rotation about the tractor drawbar is limited to slots located in the clevis’ upper and lower plates. Hitch should be secured to the tractor tongue with bolt, washers and nuts to prevent spreading of clevis.

Pintle Hitch (Optional)

Refer to Figure 1-3:

A pintle leveling rod attached to the underside of the pintle keeps the pintle parallel with the tractor drawbar at all cutting heights. Cutter rotation about the tractor drawbar is limited to movement about the pintle connection.

Hitch Assembly

Refer to Figure 1-4:

1.Install clevis rod (#1) to the deck center lug using 3/4” x 1 1/2” clevis pin (#6), 3/4” flat washer (#4) and 5/32” x 1 1/4” cotter pin (#5).

2.Install left and right leveling rods (#2) to hitch frame (#3) with 3/4” x 1 1/2” clevis pins (#6), 3/4” flat washes (#4) and 5/32” x 1 1/4” cotter pins (#5). Final adjustment should be made when the cutter is attached to the tractor.

3.Install parking jack (#7) to hitch frame (#1) and secure with attached pin (#8). Adjust parking jack to preferred drawbar height.

Wing Axle Assembly

Refer to Figure 1-5:

!WARNING!

Connect turnbuckle #4 between wing axle flanges before lowering wing. Otherwise, personal injury and/or damage to turnbuckle can occur.

NOTE: Do not tighten hardware until wing axle assembly is complete.

Wing axles are secured folded backing for shipping purposes.

1.Remove ties securing left and right wing axles (#1) and rotate axles to install turnbuckles (#4).

2.Remove locknuts (#3) and cap screws (#2).

3.Attach left and right turnbuckles (#4) to wing axles with existing 1”-8 Gr8 cap screws (#2) and 1” lock nuts (#3). Make sure grease zerks are facing up when wings are folded down.

4.Tighten locknuts (#3) to the correct torque.

22268

Standard Clevis Hitch

Figure 1-2

24730

Pintle Hitch

Figure 1-3

24847

Hitch Assembly Illustration

Figure 1-4

Turnbuckle (#3)

to be secured

between the two

flanges.

15336

Wing Axle - Turnbuckle Assembly

Figure 1-5

12 RC5020 (540 RPM) and RCM5020 (1000 RPM) Rotary Cutters 318-474M

2/02/09

Page 14
Image 14
Land Pride RCM5020, RC5020 Hitch Types, Hitch Assembly, Wing Axle Assembly, Standard Clevis Hitch, Pintle Hitch Optional

RC5020, RCM5020 specifications

The Land Pride RC5020 is a robust rotary cutter designed for agricultural and commercial applications, addressing the need for efficient vegetation management and land maintenance. This machine stands out in its class due to its exceptional durability and innovative features tailored for performance and reliability.

One of the key characteristics of the RC5020 is its heavy-duty construction. Built with a 10-gauge steel deck, it provides exceptional strength and longevity, capable of handling tough cutting conditions. The reinforced blade mounting system ensures maximum blade support, while the ΒΌ-inch thick side skirts add a layer of protection against debris and wear. This rugged structure enables users to tackle dense grass, brush, and other challenging vegetation without compromising performance.

The RC5020 is equipped with a powerful drive system that employs a smooth-running gearbox, ensuring efficient power transmission from the tractor to the cutter. This technology allows for a consistent performance and superior cutting ability, reducing downtime and maintenance needs. The machine features a quick-change blade system, enabling operators to easily replace blades when necessary, further enhancing productivity.

Versatility is another hallmark of the RC5020, as it can be operated with various tractor sizes, making it an excellent choice for both small farms and larger agricultural operations. With a cutting width of 20 feet, it efficiently covers large areas, minimizing the time needed for mowing and land clearing. The cutter also boasts an adjustable cutting height, allowing users to set the machine to their specific requirements, whether it be trimming grasses or cutting back invasive brush.

Safety features are integrated into the design of the RC5020, ensuring operator protection. These include a heavy-duty chain guard that minimizes the risk of flying debris and a unique safety latch designed to keep the cutter securely closed during transport. Additionally, the easy-access maintenance points make routine inspections and servicing quick and straightforward.

In summary, the Land Pride RC5020 rotary cutter combines robust construction with advanced technology, making it an essential tool for anyone needing effective land management. Its versatility, efficient performance, and safety features make it an ideal choice for agricultural professionals and property owners alike. Whether for mowing grass or clearing larger brush areas, the RC5020 proves to be a reliable and powerful ally in maintaining landscapes with ease and efficiency.