Using a Printer Server

233

Using NetWare
This section describes the setting procedure for network printers in the NetWare
environment. In the NetWare environment, you can connect the printer as a
“print server” or “remote printer”.

❖Setting procedure

• When using the printer as a print server
AInstalling SmartDeviceMonitor for Admin
BSetting the network interface board.
CTurning the printer off and then back on.
• When using the printer as a remote printer
AInstalling SmartDeviceMonitor for Admin.
BSetting the network interface board.
CSetting NetWare.
DStarting the print server.
❒This procedure assumes an environment is already prepared for normal Net-
Ware running the printing service setting.
❒The procedure is explained with the following example settings:
• File server’s name …CAREE
• Print server’s name …PSERV
• Printer’s name …R-PRN
• Queue name …R-QUEUE

❖Using SmartDeviceMonitor for Admin

To use the printer in a NetWare environment, use SmartDeviceMonitor for Ad-
min to set the NetWare printing environment.
❒The NetWare Client provided by Novell is required to set the printing envi-
ronment using SmartDeviceMonitor for Admin under the following environ-
ments:
• NDS mode in Windows 95/98/Me
• NDS or Bindery mode in Windows 2000/XP, Windows NT 4.0
For details about installing SmartDeviceMonitor for Admin, see p.168 “In-
stalling SmartDeviceMonitor for Admin”.