Using a Printer Server
241
OPress the {Esc} key to return to [Print Server Configuration Menu].
PAssign print queues to the created printer.
QFrom [Print Server Configuration Menu], select [Queues Serviced By Printer].
RSelect the printer created.
SPress the {Insert} key to select a queue serviced by the printer.
You can select several queues.
TFollow the instructions on the screen to make other necessary settings.
Following these steps, check that the queues are assigned.
UPress the {Esc} key until “Exit?” appears, and then select [Yes] to exit
PCONSOLE.
VStart the print server by entering the following from the console of the
NetWare server.
If the print server is in operation, quit and restart it.
❖To quit
CAREE: unload pserver
❖To start
CAREE: load pserver “print_server_name”
❒If the printer works as configured, the message “Waiting for job” appears.
Setting Up as a Remote Printer (NetWare 4.x, 5/5.1, 6/6.5)
Follow the procedure below to use the printer as a remote printer under NetWare
4.x, 5/5.1 and 6.
❒To use the printer as a remote printer under NetWare 4.x/5/5.1, set it to NDS
mode.
❒Do not use the printer as a remote printer when Pure IP is used.
Setting up using NIB Setup Tool
ALog on to the file server as an administrator or administrator equivalent.
BStart NIB Setup Tool from [Start] menu.
CClick [Property Sheet], and then click [OK].