Installing Options
57
EAdjust the notch of the Memory Unit to the slot, and then insert vertical-
ly.
FPress the Memory Unit down until it clicks into place.
GWhen replacing the default SDRAM module, press down the levers on
both sides ( ) to remove the default module ( ).
Install a new SDRAM module.
❒To increase memory capacity to the maximum of 512 MB, remove the de-
fault SDRAM module, and then install two 256 MB SDRAM modules.
HWhen installing other options on the controller board, do not close the
controller board, but go to the steps for installing the option.