Setting Up
33
Loading Paper
The following describes how to load paper into the standard paper tray (Tray 1).
❒To avoid paper jams, make sure paper is not stacked above the limit mark in-
side the tray. Misfeeds might occur.
❒Do not mix different types of paper in a single paper tray.
APull the paper tray out of the printer until it stops. Lift it slightly, and then
pull it fully out. Place the paper tray on a flat surface.
❒You cannot pull out Tray 1 if the Bypass Tray is open.
•When pulling the paper tray out, be careful not to pull it strongly. If you do,
the tray might fall and cause personal injury.