12: Advanced Settings
PremierWave XC User Guide 88
Import Configuration from the Filesystem
This import option picks up settings from a file and your import selections of groups, lines, and
instances. The list of files can be viewed from the filesystem level of the CLI.
Table 12-7 Import Configuration from Filesystem Settings
Import Configuration from
Filesystem Settings Description
Filename
Enter the name of the file on the PremierWave XC (local to its filesystem)
that contains XCR data.
Lines to Import
Select filter instances to be imported in the line, serial, tunnel and terminal
groups. This affects both Whole Groups to Import and Text List
selections.
Groups to Import
Select the configuration groups to import from the XML configuration
record. This option imports all instances of each selected group.
Text List
Enter the string to import specific instances of a group. The textual format
of this string is: <g>:<i>;<g>:<i>;...
Each group name <g> is followed by a colon and the instance value <i>
and each <g>:<i> value is separated by a semi-colon. If a group has no
instance then only the group name <g> should be specified.
To Import Configuration in XML Format
Using Web Manager
To import configuration, click XML in the menu bar and select Import Configuration.
Using the CLI
To enter the XML command level: enable -> xml
Failover Settings Failover is the process of allowing a second Network interface to back up the Primary (WAN
Connection) configured interface. It uses a Dead Remote Host reachabilit y (Ping) mechanism to
determine when it should switch over to the second interface. Failover automaticall y uses the
Primary Network configured DNS Servers as the Remote Host, if one is not configured.
Table 12-8 Failover Settings
Failover Settings Description
State
Select Enabled or Disabled to enable or disable the Failover.