Lantronix 900-598 Host Configuration

8: Terminal and Host Settings
PremierWave XC User Guide 59
To Configure the Terminal Network Connection
Using Web Manager
 To configure the Terminal on Network, click Terminal on the menu bar and select Network ->
Configuration.
Using the CLI
 To enter the Terminal Network command level:
enable -> config -> terminal network
Using XML
 Include in your file: <configgroup name=”terminal” instance=”network”>
To Configure the Terminal Line Connection
Note: The following section describes the steps to view and configure Terminal 1
settings; these steps apply to other terminal instances of the device.
Using Web Manager
 To configure a particular Terminal Line, click Terminal on the menu bar and select Line 1 ->
Configuration.
Using the CLI
 To enter the Terminal Line command level: enable -> config -> terminal 1
Using XML
 Include in your file: <configgroup name=”terminal” instance=”1”>
Host Configuration
Table 8-2 Host Configuration
Host Settings Description
Name
Enter a name for the host. This name appears on the Login Connect
Menu. To leave a host out of the menu, leave this field blank.
Protocol Select the protocol to use to connect to the host. Choices are:
 Telnet
 SSH
Note: SSH keys must be loaded or created on the SSH page for the
SSH protocol to work.