4 - PC400 Terminal Installation & User’s Guide
C H A P T E R 2
Mount the Clock
Find a suitable location where:
Temperature stays within
Humidity remains below 95%
No excessive vibrations are present
An electrical outlet is within 4 feet
Note: Exposure to outdoor conditions, rain, snow, etc voids the warranty.
Wall Mount - To install the back box
♦Locate a flat wall surface. Place the back box on the wall 48 inches from the floor, with a pencil trace the outline where the 3 holes will be drilled.
Raised Strain Relief Points.
To use these, slide the tie wrap through the raised slot(s) and secure around cable and power cord.
Figure 1
Figure 1
Alternative Mounting: Install the back box directly to an electrical box.
