Leica DM750 Manual 13
Information for the person responsible for the instrument
Information for the person responsible for
the instrument
ϘEnsure that the Leica DM750 microscope is
used only by qualified personnel.
ϘEnsure that this user manual is always
available at the Leica DM750 microscope.
ϘCarry out regular inspections to make
certain that the authorized users are
adhering to safety requirements.
ϘWhen instructing new users, do so
thoroughly and explain the meanings of
the warning signs and messages.
ϘAssign individual responsibilities for star-
ting, operating and servicing the instru-
ment and monitor the observance of these
responsibilities.
ϘDo not use the Leica DM750 microscope
unless it is in perfect condition.
ϘInform your Leica representative or Leica
Microsystems (Schweiz) AG, Industry
Division, 9435 Heerbrugg, Switzerland,
immediately of any product defect that
could potentially cause injury or harm.
ϘIf you use accessories made by third-party
manufacturers with the Leica DM750
microscope, be sure that each such manu-
facturer confirms the safety-engineering,
harmless usability of the product and
observe the product's user manual.
ϘModifications and maintenance of the Leica
DM750 microscope may only be performed
by professionals expressly authorized by
Leica.
ϘOnly original Leica replacement parts may
be used in servicing the product.
ϘAfter service work or technical modifica-
tions, the unit must be reconfigured with
observance to our technical requirements.
ϘIf the unit is modified or serviced by
unauthorized persons, is improperly
maintained (as long as maintenance was
not carried out by us), or is handled impro-
perly, Leica will not accept any liability.
ϘThe electric installation in the building
must conform to the national standard, e.g.
current-operated ground leakage protec-
tion (fault-current protection) is suggested.