Tightening the captive thumbscrew again | Leica DM750 guide

Leica EZ Viewing Tube – integrated eyepieces (cont.)

You can now safely rotate the Leica EZ viewing tube by loosening the captive thumbscrew, rotating the viewing tube, and

tightening the captive thumbscrew again.

The eyepieces are integrated into the Leica EZ Viewing Tube and preset; there- fore, there is no need to adjust or install the

eyepieces.

Continue with the "Eyecups" section on page 26.

Leica DM750	Manual	24

Image 24

Leica DM750 manual Tightening the captive thumbscrew again, Eyepieces Continue with the Eyecups section on

Contents

Leica DM750 Manual Responsible for contents Manufacturer informationPublished in November 2010 by Chapter overview Contents Safety regulations Safety concept Light bulbs Important informationProvide clarity Explanatory notes Safety instructions Important NotesDescription Contact address Intended Purpose of the Microscope So in the instructions For safety and potential hazards Instructions on usePlace of use Fungus Rights to any warranty claims Scope of this manualTransport Disposal Health risks and dangers of use Health risksDual or detachable eyecups LED Klasse 1 /LED 1 Laser Product Information for the person responsible for the instrument Information for the person responsible for the instrument Cleaning coated parts and plastic parts Cleaning glass surfacesϘϘ Remove tough dirt using alcohol or petro- leum ether Care instructions Accessories, maintenance and repair AccessoriesMaintenance Repairs and service work Fuse Replacement Electrical data and ambient conditionsElectrical data Environment Leica DM750 Introduction Result if used improperly Unpacking Ready Adjustable Condenser Centering Substage IlluminationLeica DM750 is available with two Types of Substage Illumination. Identify Tool Attaching the viewing Tubes Tools usedϘϘ Allen key Leica EZ Viewing Tube integrated eyepieces Leica EZ viewing tube with integrated eyepieces Tightening the captive thumbscrew again Eyepieces Continue with the Eyecups section on Leica Standard Viewing Tube separated eyepieces Insert the eyepieces into the tubesOrientation Installing Objectives section on EyecupsOrder to help block out ambient room light Installing Objectives Installing ObjectivesObjective nosepiece Installing the Substage Condenser Ser needs to be installedSubstage Condenser Thus roughly centered Set Power Cord Setting the Illumination IntensityTurning on the microscope Work Surface Complete Condenser Centering Delivery package or, for a Leica DM750With Koehler illumination, tighten Knurled screws Using the Condenser Using the Condenser Prepare to View a Specimen Slide Slide grips hold the slide in place Focusing Viewing Tube Adjustment Adjust the eyetubesStandard Viewing Tube with One or Two Focusing Eyepieces Leica EZ Viewing Tube On and your adjustments will be minimal Koehler Configuration Condenser focusing knob Koehler Configuration Oil Immersion Technique Oil Immersion Technique Time Delay Shutoff Changing the status of the time delay shutoffOr Disabled and you will not see any blinking No changes in the intensity control Leica DM750 Manual Ready! Set! Go Care of the Microscope General maintenance Instructions for cleaningStorage and handling Mechanical Maintenance Illumination Troubleshooting Troubleshooting Make sure that a DF objective is being used Phase contrast Dimensions Leica DM750 Manual Leica DM750 Manual Leica DM750 Manual