Turning on the microscope
Work Surface
Always use your microscope on a hard, stable surface.
Power Cord
If the power cord is not already atta- ched, attach it securely to the back of
the microscope.
Setting the Illumination Intensity
Set the illumination to the lowest setting to start with, using the control- ler on the bottom left of the stand. The illumi-
nation control knob allows you to adjust the intensity of light produced by the illumination system.
Plug in and Turn on the Microscope
1.Plug the power cable of the microscope into a corresponding grounded socket. A grounded
2.Switch on the microscope using the switch at the bottom right of the microscope stand.
Leica DM750 | Manual | 31 |
|
|
|
