Leica DM750 Leica Standard Viewing Tube separated eyepieces

Leica DM750 Manual 25

2. Secure the eyepieces in the tubes by tighte-

ning the silver screws at the bottom of the

tubes using a standard Phillips screwdriver

(not included in the delivery package).

The eyepieces will still rotate, but they

will be captive in the eyetubes.

The standard viewing tube has a rota-

table dovetail. Therefore, you can now

rotate the standard viewing tube freely in any

orientation.

1. Insert the eyepieces into the tubes.

Standard viewing tubes; tubes do not include

eyepieces yet

Contents

Main Manufacturer information Chapter overview Contents Page Safety concept Symbols used in this instruction manual Important Notes Intended Purpose of the Microscope Information for the person responsible for the instrument Care instructions Accessories, maintenance and repair Electrical data and ambient conditions Page Introduction Unpacking Page Substage Illumination Attaching the viewing Tubes Leica EZ Viewing Tube integrated eyepieces Page Leica Standard Viewing Tube separated eyepieces Eyecups Installing Objectives Installing the Substage Condenser Installing the Substage Condenser (cont.) Page Turning on the microscope Complete Condenser Centering Using the Condenser Prepare to View a Specimen Slide Page Oil Immersion Technique Oil Immersion Technique (cont.) Time Delay Shuto Page Page Page General maintenance General maintenance (cont.) Page Troubleshooting Troubleshooting (continued)