Installing the Substage Condenser (cont.)
4.Push the substage condenser under the specimen stage into the holder by alig- ning the locating pin on the bottom of the condenser with the slot on the rear side of the fork.
5.Move the condenser into the highest posi- tion by using the condenser focusing knob on the left side of the stage mount.
6.Tighten the two setscrews using the tool included in the delivery package (or, for a Koehler stand, tighten the two wingscrews) so that the upper lens of the condenser is centered under the objective in working position and the substage condenser is
thus roughly centered. | You will center the condenser more accu- | ||
| |||
| rately when you get to the "Complete | ||
|
|
|
|
| Condenser Centering" section on page 32. | ||
|
|
|
|
Leica DM750 | Manual | 29 |
|
|
|
