Lennox Hearth BT135 Turning your headset on and off, Pair it with your phone, How to

GB	6. Turning your headset on and off
CN	• Press the answer/end button to turn on your headset.
	• Press and hold the answer/end button to turn off your headset.
CN	7. Pair it with your phone
JA	Before you use your Jabra BT135, you need to pair it with your mobile
	phone. (Follow step 1-4 in fig 3).
KO	1. Put the headset in pairing mode
	• Make sure the headset is off .
TH	• Press and hold the answer/end button until a solid blue light comes on.
	2. Set your Bluetooth phone to ‘discover’ the Jabra BT135
MA	Follow your phone’s instruction guide. This usually involves going to a
	‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the
	option to ‘discover’ or ‘add’ a Bluetooth device.* (See example from a
	typical mobile phone in fig. 3)
	3. Your phone will find the Jabra BT135
	Your phone then asks if you want to pair with it. Accept by pressing
	‘Yes’ or ‘OK’ on the phone and confirm with thepasskey or PIN = 0000
	(4 zeros).Your phone will confirm when pairing is complete. In case of
	unsuccessful pairing, repeat steps 1 to 3.
	8. Wear it how you like it
	The Jabra BT135 is ready to wear on your right ear. If you prefer the left,
	gently pull out the earhook, rotate the ear hook 180°, and insert. (See fig 4).
	The earhook can be adjusted to fit your ear better – squeeze the back edge
	of the earhook for a more secure fit.
	Your Jabra BT135 can be personalized by exchanging the snap-on cover. To
	change cover, gently pull up the cover from the front of the headset. Insert
	the new cover by fitting it above the charging socket.(See fig 5).
	For optimal performance, wear the Jabra BT135 and your mobile phone on
	the same side of your body or within line of sight. In general, you will get
	better performance when there are no obstructions between your headset
	and your mobile phone. (See fig 6).
	9. How to...
	Answer a call
	• Tap the answer/end button on your headset to answer a call.
	End a call
	• Tap the answer/end button to end an active call.

Make a call

•When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your headset. If your phone does not support this function, tap on the answer/end button on the Jabra BT135 to receive the call in the headset.

Reject a call*

•Press the answer/end button when the phone rings to reject an incoming call. Depending on your phone settings, the person who called you will either be forwarded to your voice mail or hear a busy signal.

Activate voice dialing*

•Tap the answer/end button. For best results, record the voice-dialing tag through your headset if your phone allows you to do so. Please consult your phone’s user manual for more information about using this feature.

Redial last number*

• Press the answer/end button.

Adjust sound and volume

•Press the volume up or down (+ or -) to adjust the volume.

Call waiting and placing a call on hold*

This lets you put a call on hold during a conversation and answer a waiting call.

•Press the answer/end button once to put the active call on hold and answer the waiting call.

•Press the answer/end button to switch between the two calls.

•Tap the answer/end button to end the active conversation.

*Phone dependent

10. What the lights mean

What you see	What is the mean about your headset
Flashing blue light	Flashing every second: active on a call
Flashing blue light	Flashing every three seconds: in standby mode
Flashing blue light	Running low on battery
Solid blue light	Charging
Solid blue light	In pairing mode – see section 7

GB

CN

CN

JA

KO

TH

MA

RELEASE YOUR JABRA Jabra BT135 Bluetooth headset