Lennox Hearth CI2500DVF manual Wiring Diagrams, SIT Millivolt Wiring Diagram, Warranty Information

Models: CI1500DVF CI2500DVF

1 20
Download 20 pages 1.98 Kb
Page 10
Image 10
WIRING DIAGRAMS

WIRING DIAGRAMS

Wiring diagrams are provided here for reference purposes only. This information is also provided on schematics attached directly to the appliance on a pullout panel located within the control compartment.

CAUTION: LABEL ALL WIRES PRIOR TO DISCONNECTION WHEN SERVICING CONTROLS. WIRING ERRORS CAN CAUSE IMPROPER AND DAN- GEROUS APPLIANCE OPERATION.

SIT Millivolt Wiring Diagram

If any of the original wire as supplied must be replaced, it must be replaced with Type AWM105°C – 18 GA. wire.

 

TH TP

TP

TH

Thermopile

* SWITCH

 

 

* ON/OFF SWITCH, OPTIONAL

 

THERMOSTAT OR REMOTE

Figure 20

CONTROL RECEIVER

 

If you encounter any problems or have any ques- tions concerning the installation or application of this system, please contact your distributor, or Lennox directly:

LHP

1110 West Taft Avenue

Orange, CA 92865

Visit us at www.LennoxHearthProducts.com

WARRANTY INFORMATION

Your gas appliance is covered by a limited twenty year warranty. You will find a copy of the war- ranty accompanying this manual. Please read the warranty to be familiar with its coverage.

Retain this manual. File it with your other docu- ments for future reference.

Optional Room Air Blower

IMPORTANT: Ground supply wire must be connected to the green wire attached to the green ground screw. Failure to do so will result in a potential safety hazard. The appliance must be electrically grounded in accordance with local codes or, in the absence of local codes, the National Electrical Code, ANSI/NFPA 70 - latest edition. (In Canada, the current CSA C22-1 Canadian Electrical Code - latest edition.

WARNING: The power cord MUST BE PLUGGED DIRECTLY INTO A PROPERLY GROUNDED THREE-PRONG 120 VOLT, 60 HZ WALL RECEPTACLE. Do not cut or remove the grounding prong from this plug. Do not route power cord under or in front of appliance.

When ordering repair parts, always give the following information:

1.The model number of the appliance.

2.The serial number of the appliance.

3.The part number.

4.The description of the part.

5.The quantity required.

6.The installation date of the appliance.

PRODUCT REFERENCE INFORMATION

Blower Wiring Diagram

Power Cord

Blower Assembly (Shown Rotated 90

BlowerDegrees CCW)

Mounting

Bracket

Black Black

White

White Black

Fan Disc

Rheostat

Figure 21

REPLACEMENT PARTS

A complete parts list is found at the end of this manual. Use only parts supplied from the manufacturer.

Normally, all parts should be ordered through your Lennox Hearth Products Distributor or Dealer. Parts will be shipped at prevailing prices at time of order.

We recommend that you record the following important information about your stove. Please contact your Lennox Hearth Products Dealer for any questions or concerns. For the number of your nearest Lennox Hearth Products Dealer, please call 800-731-8101

Your Stove's Model Number __________________________________________

Your Stove's Serial Number ___________________________________________

The Date On Which Your Stove Was Installed _____________________________

The Type of Gas Your Stove Uses ______________________________________

Your Dealer's Name ________________________________________________

10

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Page 10
Image 10
Lennox Hearth CI2500DVF Wiring Diagrams, SIT Millivolt Wiring Diagram, Warranty Information, Optional Room Air Blower