PLANNING YOUR INSTALLATION
QUESTIONS TO ASK THE LOCAL BUILDING OFFICIAL
Correct installation is critical and imperative for reducing fire hazards and perilous conditions that can arise when gas appli- ances function improperly. The appliance must be installed per manufacturers’ instructions.
Gas appliance equipment and installations must conform to appropriate local codes and applicable state and federal re- quirements. Familiarity with these requirements before instal- lation is essential. Important considerations to discuss with local building officials include:
1.Applicable codes (i.e. Uniform Mechanical Code, State or Regional Gas Codes, National Fuel Gas Code)?
2.Local amendments?
3.Recognized testing lab: CSA / AGA.
4.Is a permit required - cost?
5.In some states or municipalities, a licensed gas fitter or plumber may be required to install this appliance. Check with your local building official for requirements in your area (i.e. Is a license required for installation of gas supply line)?
6.Maximum amount of gas pipe without a pressure test - type of test required?
7.Are below grade penetrations of the gas line allowed?
8.Is concealed gas piping allowed?
9.Specific requirements of concealed fittings?
10.Is rigid pipe to appliance required?
11.Allowed piping materials?
12.
13.May the
14.Rooms where the installation is not allowed?
In the absence of local codes, installation should conform to the National Fuel Gas Code, also known at ANSI Z223.1- NFPA 54.
PAGE 5
