41653_model43558.pmd

22

PROGRAMMING

22

Setting Time and Day

■The LCD will show this information when batteries are first installed, or after the Reset button is pressed.The temperature will update after a few seconds.

■During time and day setting mode, the temperature and program displays will go blank.

■Example: Set the Thermostat to the current time of 2:16 PM on Saturday. Refer to the Steps below.

Monday 4

Temp

AM

SystemFan

Step 1

day-time

 

or

Step 2

day-time

 

or

■Press to enter time and day setting mode. The current hour and the AM / PM indicator will be flashing.

■Press to change the Hour up or down to the current hour.

Note the AM / PM indicator, as the display will change at 12 AM and 12 PM.

■Press again to change from hour setting to minute setting. The current minute will be flashing.

■Press to change the Minute up or down to the current minute.

Monday

AM

Monday

PM

23

Step 3

day-time

■ Press again to change from minute setting to day setting. The current

Saturday

 

 

day will be flashing.

■ Press to change the Day up or down to the current day.

 

or

 

PM

 

 

 

 

 

Step 4

day-time

■ Press again to change back to the normal display.

Saturday

2

 

 

 

or

 

 

Temp

 

 

AM

 

 

ret-clear

 

 

 

 

System

Fan

 

 

 

NOTE: You may press ret-clearat any time during Day and Time setting to return to the normal display.

12 Hr. / 24 Hr. Time Format

Your thermostat is set from the factory in normal 12 (AM / PM) time format. To change to 24 hour (military)

time, press option at any time while the Hour, Minute,

or Day is flashing to toggle between the 12 hour and 24 hour

formats. The AM / PM indicator will not be displayed in 24 hour mode. Both the current time and all programs will automatically change to the selected format. The time format may also be changed in the Option Menu.