41653_model43558.pmd
26
PROGRAMMING | 26 |
Programming
■Your thermostat can be programmed for weekdays and week- ends, have unique programs for all 7 days, or the same pro- gram for everyday. Use Weekday/Weekend Programming be- low,
■Familiarize yourself with Manual Programming, so that you can easily modify your programs as your comfort needs change. Follow the steps below to change the program times and temperatures.
NOTE: 1) The program time can be set in 10 minute incre- ments, and remains the same for both Heat and Cool programs.
2)The program temperature can be set in incre- ments of 1°F (1°C).
3)The Heat setpoint can not be set higher than the Cool setpoint, and the Cool setpoint can not be set lower than the Heat setpoint.
4)If the system selector is in AUTO mode, the current operating mode will be used for pro- gramming.
5)After 15 seconds without a key press, the ther- mostat will return to normal display mode.
6)When setting the program time, note the AM / PM indicator.
7)With the Auto Recovery feature enabled, you do not need to set your comfort program times early. Auto Recovery will determine how early to turn your system on, so that the room is com- fortable at the program time.
27
Weekday/Weekend Programming | 27 |
Step 1 | ■ | Slide Power Switch to ON. |
on off em | ■ Press to select HEAT or COOL to program the corresponding system. | |
|
| (AUTO may be selected, but does not affect the programming steps.) |
NOTE: If the power switch is in the OFF position, the last system selected will be programmed.
Thursday 2
Temp
AM
SystemFan
Step 2 | program |
Step 3 |
|
| or |
Step 4 | program |
■Press to enter program mode. Weekdays are displayed and program 1 is flashing.
■The Program hour and AM or PM indicator are flashing. Press to change the hour.
■Press again to change to the minute position. The current minute will be flashing.
Weekdays | 1 2 3 4 |
| Temp |
AM |
|
System | Fan |
Weekdays 1 2 3 4
Temp
■ Press to change the minute. | AM |
|
or | System | Fan |
|
(continued)