41653_model43558.pmd
32
PROGRAMMING | 32 |
Everyday Programming (continued)
Step 5 | program |
| |
| or |
Step 6 | program |
|
■Press again to change to the program temperature. The current tem- perature will be flashing.
■Press to change the temperature.
■Press again to move the next program number.
■Repeat Steps 3 through 5 to change the remaining programs.
■Press at any time to exit the Program Mode.
■After 15 seconds, the thermostat will return to Normal mode automatically.
Everyday | 1 2 3 4 |
| Temp |
AM |
|
System | Fan |
Step 7 | system ■ Change to the other system and repeat steps 2 through 6. |
33
Program Options | 33 |
Programmable Fan
fan
■Any time during programming, this will change the fan display between “AUTO” and “ON” for the selected system and Program number. (Heat and Cool can be set separately.)
“AUTO” = Fan control runs when the system is ON “ON” = Fan control runs continuously
Weekdays | 1 2 3 4 |
| Temp |
AM |
|
System | Fan |
NOTE: Fan must be set to “PGM” for the Programmable Fan to be activated.
2 or 4 Programs Per Day
option ■ Any time during programming, this will change the number of programs per day between 2 and 4.
Program numbers 2 and 3 are turned OFF when 2 programs per day are selected.
Weekdays 1 4
Temp
PM
SystemFan
■The display will show which programs are available. If only the active program number is displayed, then there is a difference between days of the selected group.