41653_model43558.pmd

40

OPERATION

40

Temporary Manual Override

To temporarily change the current set temperature without affecting your program:

■Press or and hold for about 1 second to enter Manual Override mode. Display will flash.

■Press or to change to your desired new temperature.

3

ret-clear■ Press to return to normal mode, or wait 5 seconds for it to return automatically. ■ The current program number will flash to signify the Temporary Override.

■ At the next program change, the Temporary Override is canceled, and

the next program temperature becomes the setpoint temperature.

Set Temp

Temp

SystemFan

To end the Temporary Manual Override:

ret-clear■ Press to return the set temperature to the current program set temperature.

NOTE: The Auto Season Changeover feature will not operate while the thermostat is in Temporary Manual Over- ride. Refer to the Auto Season Changeover feature on page 43 for more information.

NOTE: If Vacation Hold is set, then the number of days remaining will also be displayed. Refer to the Vacation (Programmable) Hold section on page 42 for more information.

41

Permanent Manual Override

To hold your manual override for an extended period of time:

vac

at

■ Press to make the current room temperature the HOLD tempera-

ion

hold

ture. HOLD will alternate on the display with the day and any

other messages.

■Follow the Temporary Override instructions above to change the Permanent Override temperature.

■You can confirm the held set temperature by pressing for less

or

than 1 second.

41

Hold

Temp

AM

SystemFan

To end the Permanent Manual Override:

ret-clear■ Press to return to the current program. The HOLD display will be canceled.

NOTE: The Auto Season Changeover feature will not operate while the thermostat is in Permanent Manual Over- ride. Refer to the Auto Season Changeover feature on page 43 for more information.