3.Remove the four screws that secure the heat sink to the system board.
Note: Carefully remove the four screws from the system board to avoid any possible damage to the system board. The four screws cannot be removed from the heat sink and fan assembly.
Figure 16. Removing the heat sink
4.Lift the failing heat sink off the system board.
Notes:
a.You might have to gently twist the heat sink to free it from the microprocessor.
b.Do not touch the thermal grease while handling the heat sink.
5.Position the new heat sink on the system board so that the four screws are aligned with the holes on the system board.
6.Alternate tightening each screw a small and equal amount until the heat sink and fan assembly is secured to the system board. Do not
7.Go to “Completing the parts replacement” on page 30.
20User Guide