Lenovo G460e/G560e

1180 Antenna assembly and LCD cover

For access, remove these FRUs in order:

“1010 Battery pack” on page 34

“1020 Dummy card” on page 35

“1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot compartment cover” on page 36

“1040 Hard disk drive” on page 37

“1050 Optical drive” on page 39

“1060 DIMM” on page 40

“1070 PCI Express Mini Card for wireless LAN/WAN” on page 41

“1080 Keyboard” on page 43

“1100 Keyboard bezel” on page 48

“1110 System board” on page 53

“1120 LCD unit” on page 57

“1150 LCD front bezel” on page 64

“1160 LCD panel, LCD cable and hinges” on page 66

Figure 18. Removal steps of antenna assembly and LCD cover

Peel off the adhesive tapes securing the antenna boards, release the

cables from the cable guide, and then remove the antenna assembly in the direction shown by arrows a.

1

1

When installing: Route the antenna cables along the cable guides and secure the antenna boards with adhesive tapes. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.

71

Page 75
Image 75
Lenovo G460E, G560E manual Antenna assembly and LCD cover, Removal steps of antenna assembly and LCD cover